01VWGREENMACHINE
Members-
Posts
421 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by 01VWGREENMACHINE
-
i think im over using the amp. if im running full tilt she will flip into protect for a few seconds. then resume normal play. if i dont turn my bass knob all the way up it wont do it.
-
Laptop freezing someone help!
01VWGREENMACHINE replied to new guy's topic in Computer Talk - News, technology, advice
the issue is more than likely a corrupt operating system (or files in the os) i bet if you re-install windows it will work just fine or if you can use your os cd as a boot cd and select the option to repair windows that might work. let us know -
NEED HELP! is the rf t1500-1bdcp a good amp for the 13W7???
01VWGREENMACHINE replied to MrKapone's topic in Amplifiers
its a great idea i love my t1500 -
-
i can switch between 1 and 4 ohm
-
Does it look like paint? I've heard of some voice coils being painted to identify the ohms of the coil. But I think they were DC subs. i wish i could get a pic ill try
-
getting 3.5 ohm per sub i subtracted the resistance of the wires themself
-
noob question i know i have 2 rockford fosgate t1d212's and i pulled them out of the box for the first time in 6 months and the coils are black. they sound good still no scratching they move freely and dont bottom out and they have never smelt burnt. they are in a ported box also hooked to volt meter to check ohm and i am getting 3.5 ohm per sub when wired to 4 ohm
-
could it be the fact that my woofers are blown?? the coils are burnt
-
been there done that
-
200 amp ho singer alt runs at 14.1 it doesnt see 13 at all dual batts stock up front and hc800 in rear
-
When mine did that was when I had a 4 gauge wiring kit with 2 kenwood performance series 1,800 watt amps. I Went to a 0 gauge wiring kit and it stopped. And it only did it when I was hitting hard. But, when I was just cruising and had it on low it was fine. If you already 0 gauge then idk. Bad wire maybe?? well not sure if thats it but i have all 1/0 stinger wire exceot the last 12 inches from the dis block to the amp. the amp only has 4guage wire inputs
-
first off i haven't had any problems with my amp its a rf t1500bdcp and i have 2 rf T1d212's running at 2 ohm's. problem is every so often it will cut out for about 10 seconds. amp is not getting hot at all, the grounds are all good at 0.1 ohm is all im getting with my volt meter. its getting plenty of power so im stumped any help would be awesome. thanks in advance!! see my build for more build info and pics in my sig below
-
Big 3 question!!
01VWGREENMACHINE replied to jereZacatecas18's topic in Electrical-battery- Alternators- Wiring
didn't mean welding specifically i was talking about the current running threw the metal has a better connection on the frame then the chassis Oh oh ok, well im foin the big 3 because I have a single cab chevy silverado with a blow through with 2 15 fi bls and my lights are dimmin way too mush, my voltage goes down too 9, I was planning too weld a plate on the chasis between the cab and get my capasitor and amp grounds from their because right now I have dem just too the seat bolt, will this helpp too or just by doin the big 3??? big 3 will help alot either way you look at it but i would go strait to the frame way better ground -
Big 3 question!!
01VWGREENMACHINE replied to jereZacatecas18's topic in Electrical-battery- Alternators- Wiring
didn't mean welding specifically i was talking about the current running threw the metal has a better connection on the frame then the chassis -
Big 3 question!!
01VWGREENMACHINE replied to jereZacatecas18's topic in Electrical-battery- Alternators- Wiring
you can do that but its better if you run a 1/0 to frame and engine less crap to go through such as spot welds and paint (correct me if im wrong) but its totally up to you -
i payed the 210 from sonic electronix and love them they retail for 500 so 210 i aint worried. i will be buying another set as soon as i get a new 4 channel to handle them
-
mostly 1/4 inch bits
-
it would be a great match up for a set of t2 comp they are 209.99 from sonic and worth every penny!
-
i just finished installing mine on a t400.4 t2652-s they are bad ass im going to buy another set!!! asap! for the rear!
-
2 Rockford t1500cp... how much electrical?
01VWGREENMACHINE replied to SlamminBeats's topic in Amplifiers
alts are easy to install why do you need to pay someone to install it?? if you can install your own system you should be able to install and alt -
2 Rockford t1500cp... how much electrical?
01VWGREENMACHINE replied to SlamminBeats's topic in Amplifiers
i agree i payed 365 for my 200 amp alt shipped and Mike is great to work with