soundcheck11

I love the amp rack drawer. thats some pimp shizznit right there!

Thank You for your input! Think i will go for a couple different amps as i dont neccessarily want to go out and spend another few $$$g just for 6volt batteries and regulators and stuff. Thank You Sir!

doesnt say it has to be powered by 18v just says it can handle up to 18 volts. but like most have said i realizse the power will be greater at an 18v input. I did read somewhere on the cadence website that there testing was done at a 14.4v. but i do appreciate the help guys. still looking into amps to get for my set up. even with a this amp it would still put out what id need to 4 w7's at a lower voltage than 18v

its all tested at 14.4 volts peak 14k, rms 7k @ 1ohm. Want to run at .75 but obviously wish voltage drops the rise will probably be nearly 1-1.5.

Does anyone else have any input?

Looking for someone that knows and has used Cadence amplifiers before. Looking at the Cadence ZRS C7 7000d amp. Would like to know if it would be stable enough at .75ohm. Thank you for your help Jordan

currently running 2 220 amp alts, 4 runs of power front to back, of course 0 guauge to alts, the only issue is my batteries, i have 5 yellow top group 34 batts. that my be the only thing that will pull me down alittle. I have learn a few things about these subs. They dont like sealed boxes and they can take WAY more power then they say. Had a friend that put 2500 to one sub. It is all down to the box design, luckily i have a friend that is a great box designer. these will be put into a power cube wall design with about 11 cubes after displacment with a port tuning of 32hz as im going for more of a daily system instead of spl. just want the capability to get loud. Thank you all for your help i do appreciate your inputs!

Really? Even thou theres no ratings for anything below 1 ohm? Just worries me sometimes not knowing if it will actually go that low concidering you put out that much money youd expect to get every rating possible you know... Thank You Depends on the amplifier, yes that aq3500.1 can play below 1 ohm if you have the electrical to back it up (wich you said you have) , that amplifier should MURDER awesome! Thank You!

Really? Even thou theres no ratings for anything below 1 ohm? Just worries me sometimes not knowing if it will actually go that low concidering you put out that much money youd expect to get every rating possible you know... Thank You

stetsom has amps that will get me very close to that but dont feel like paying $2k for them

i def have the electrical to back it up but thats only 875 a sub, currently i have about 950ish per sub. Thank you

Im in need of some help with finding the best amplifers for my subs. First off i have 4 12" JL W7's. they will take 2k power easy but looking for something in the ball park of around 1.5-1.6k power to each sub. My predicament comes in the form of that these subs are only a single 3 ohm vc. These are my option, along with some questions. First, I try and find 1-2 amps that will power all them at .5-.75 ohm. What amps will do that and be efficient? Second, do i go with 4 2 channel brigable amps? The only issue i see here is that most amps are 4ohm brigded. Whats the likly hood of the amps failing with a 3 ohm load? Thank You for your time and help!! Jordan

the umbrella holders are nice lol

13w7 is 2.375cuft ported for 30hz 12w7 is 1.75cuft ported for 32hz 10w7 is 1.5cuft ported for 32hz 8w7 is 1.0cuft ported for 32hz i have 4 12w7's they play good in an 8cuft box tuned to around 30hz. I had 2 before that and it sounded amazing in just under a 4cuft sealed box. So, id suggest getting your box very close to these specs and it will sound pretty damn good. Good luck

1.7 ported is roughly what you need for 12-13.5" w7