EBW

the 15s are in a 7.75ft^3 35hz box ram designed for me lots of port 4"x34"

Equals? Ordered a new amp still have to get some better batts and another couple more runs of power wire hoping to bust that 150 mark with this setup

My name is on there twice ones going to crunkjuice though.... so am I looking at a month wait from time ordered or from date of video? Getting ready to order a saz2500 would love to set it up w/ the dd-1

Thanks for the input ppl I'm gonna head to memphis this wwekend and pay $40 for an hour of tl time :/ west tn sucks lol I could go local and get it don't on an ac I bet I bust a 150 on that. Ha

I was thinkin about buying a saz2500 from dbr their pretty cheap. And their almost cheater amps

Yes great 144.5 is pretty loud... too bad its not loud enough for me I iiiiiiii neeeeedddddddd mmmmooooooaaaarrrrr

Thanks but I know its louder than 144 can't wait to get my dd-1 (someday) so I can tune it I ran my scope over a few days ago but I'm sure with a good batt and about 2500rms I can break I 150

Lawl^^^ made my day I'm tryin to bust a 150 I'm sure I will need a real agm batt and bigger amp but its pretty damn loud get some windshield flex and the whole truck breathes when the bass hits +edit Its loudest sealed and everything rattles I think I'm going to end up cheating and spending some money to break the mark :/

What kind of numbers do you think I should expect out of 1600wrms? (TL) I'm runnin a Kenwood kiv900bt hu to a slightly modded bx1605d yea the old ones have to reclamp it last time I was getting 1511 at 12.5v and now running about 13.8v-14.6v and 2 sa15s 7.75ft^3 35hz in a 98 blazer lt no deadener :/ what can I say I'm doing this on a challange of trading or selling audio stuff for more audio stuff all started with an ak47 sold it bought 4 memphis m3 10s and the bx1605d broken. Sold 2 of the 10s in a box I built and bought the sa15s used 0/1 welding cable I've had since my s10 build when I was 16... and a deep cycle batt I already had. But any way... Any predictions? Before I hit a TL

http://www.stevemeadedesigns.com/board/topic/117344-blazer-on-a-budget/page__p__1648442__fromsearch__1#entry1648442

Now go look at my new box!

I fixed it! Thanks a bunch didn't mean to leave ya out

Sorry bud I looked though my emails must have missed ya. Had a lot of pm on this one

The first 100 were numbered and signed. And my .02 is that the sub simply is designed for SQ. Believe that or not... but it is. The only reason it is put into SPL applications is because of its name. Damn beat me to it

That's cause their $900+ a pop dude, can you drop 1800 on a pair of subs? How about $3000 on amps to push them? $500 on batteries? 250-300 in wiring? $130 on wood $50 on terminals and that's for cheapos.... do some math high quality stuff cost big bucks... And that's if you do it yourself, theses are not kicker cvrs. Not trying to be brash but it sounds like you didn't research at all before you came in here vomiting info Have a nice day

I like this twist on abe lincoln's qoute

Bump for 1st post edit

I've got 2 15-m3mojo10s had 4 and sold 2 to get the sundowns. A buddy of my custom ordered 2 memphis 18" back in the day and they are crazy tough

:/ I knew I should have pre-ordered

Good deal as soon as I get off work I'm gonna order that dd-1 for crunk I was busy building a new box yesterday

Shipping to 38301.... not even gonna talk ya down

Thanks to fosgatefan we meet our goal! Please don't send anymore money I don't wanna issue refunds Thanks everyone

Yea I'm not normally the forum type I have watched smd and a few others for years but somthing told me to make an account a few days ago... fate works in mysterious ways

I think $14 should cover it and the order will be made