droopy89

Thank ya thank ya,, but HOLY CRAP,, i just realized how puny my brakes are,, eh. i was wantin to go with a C5 Corvette front brake set up anyways, now i have an excuse

Theyre 20" IROC replica wheels,, the exact same as the id 80's IROC Camaros,, but bigger and shiney just thought id share the new chromeyness :zorro:

you could cut teh coils on the front, but how it rides will depend on how you cut them,, id use a bandsaw, and id only cut a coil, it wont ride as good as stock, a little "stiffer",, if you use a torch, it will change the spring rates, the heat will mess with the characteristics of the metal, and most likely will ride like poo

the 4.3 in his Jimmy would sound completely different than your grand am

you could install it yourself, even if you dont have a welder,, at just about any parts store, in the exhaust section,, theres dozens of different sizes of reducers, couplers and clamps, so all you would have to do is cut yours off, and bolt everything back on,, but i prefer to have them welded personally

whats your gamertag?? or send me an invite,, DREWPY89

you can leak them now

guys, i had a blast,, good game everyone that was in on it tonite

i actually only paid bout 300,, cost of parts,, it helps to know the shop owner,, but since then,, everythings gone up a bit,, check www.summitracing.com out,, they should have cheap prices on the muffler, and the cat if you decide to go that route

it happens,, i just got lucky and got mine to work

you got lucky,, and why is it soo quiet?

hey steve,, i just added meade916,, want me to join ya? EDIT: or anyone feel free to invite me

Between the two of my trucks,, both a 4.3 and both have exhaust on them,, i like the one with my Flowmaster 40 series on it,, i have a Magnaflow Highflow Cat. Converter on it with 3 inch exhaust piping all the way out,, and turndowns on the muffler,, it sounds pretty deep at idle and lower rpms,, once you get to the upper rev range, it isnt as deep, but its no where near rice

hey jamen,, i think it was you that added me the other nite,, just send a invite my way when your all playin again,, and ill school ya guys

if anyones playin tonite,, im on for a couple hours,, DREWPY89 is the gamertag

how much money would you like to spend? Did the v8 swap not lower it a bit in the front? You can buy drop spindles for the front, several companies make them,, id reccomend Belltech or DJM over any others. Cutting the springs is a cheap way to do about it, but if you do, cut them with a bandsaw, a torch will heat up the entire spring and drastically change the spring rates,, in other words itll be extremely soft. Your axle is already over your leafs in the back, so you either need drop blocks, or drop leaf springs. sorry if this doesnt really make sense,, but if you got any questions, pm me and ill be glad to help

ya know, for some reason i had the same prediction

If its going in the box body S10 then yes, thats the right housing, the bulbs, never heard of that brand

so does that make you the pooper scooper?

Congrats!!

hey, i still have my set of MB Quart 5.25 comps for sale if your interested Drew

If i only had money,, dangit

not at all

I like it,, but how will it attach to the manifold?

never heard that one before, but yea, still has me laughin