eaglescorpio1

you are referring to the detect light and not the distortion light, correct?

thank you. i will be looking into some speakers.

as in? you have things in mind and i know that you know your shit. i asked a question which involves input from you. Please give that input.

fi's or kove or both? What would you recommend sub wise?

my avatar is what is being ran off of one. im sure you know of kandiman. we did not document the install but he built the enclosure for the 2 15" fi q's. He was involved in damn near every part of the install. he is the man. wiring, enclosure, dampening material, gutting and reinstalling interior, installing both batteries and modifying the stock battery rack for the new one. he helped me tremendously. I have them just how the avatar shows. forward firing vented at 34 hz i believe. dont remember the exact cubes. its amazing. very accurate, tight, and ruthless considering how good it all sounds. im also running 5 1/4 inch hertz hi energy components in my kick panels up front. off of a jlaudio e4300 bridged. i would have to say that the audisons are absolutely amazing for sq. the other one is gonna go on one 15" kove armaggedon rebuilt by psi. hopefully i can run all 2k on it. lol!!!

Will do. Thank you for doing foot work for me on this. all i have around here is my local dealer and i rarely get straight answers from him. i will try calling electromedia directly. again..... thank you. and if i ever drop these amps... you will be the first person i contact.

dont need the raccord. I do have one for the cs. i need the module and fan assembly itself. If i ever do decide to sell them, you will be the first to get a message. Anyone else know where I can get the extensions for the vrx series?

What specifically do you have? The module? the fans themselves? and the chrome shadow raccord to fit the fan assembly? all of it? Please let me know. I need that also. Thank you so much. oh yeah, and a price please. If you would like to message me that would be great. thx

What specifically do you have? The module? the fans themselves? and the chrome shadow raccord to fit the fan assembly? all of it? Please let me know. I need that also. Thank you so much.

I own two audison vrx 1.500.cs.2's and I have had trouble finding these modules for sale, for American money, on American soil. If anybody has these extensions or can get them, i am a serious purchaser. Also, the spl kit and information on that would be great. Thank you very much.

dd 1508 in a tline, underpowered, flexes doors. lol.

U must not know what I am talking about if u are referring to my posts. I am talking about a ac to dc converter. It converts 120v into however many volts it is switched to, with a given amperage output at that voltage. So, 12v setting, 80 amps output on a 1000d amplifier shouldnt be bad, especially if he had a kinetik or powermaster between the converter and the amp.

From what I see, the 2.1 setup has its own amplifier. what u need to do is take a set of rca's and run them from the rca output of the front channels of ur av unit to the rca inputs that turn into the headphone jack before the volume control of the 2.1 unit. the sub of the 2.1 system has its own amp for itself. All it needs is an rca or headphone signal to operate. Like i said. ur av unit should have rca outputs for the "front left and right" channels. use those to run the signal to the 2.1 system. run ur car audio sub amp off the sub output of the av unit.

just run a jumper lead from the + input on the amp to the remote input. then when you shut off or unplug the ac to dc converter, the amp will shut off cause there is no voltage running at all through its outputs to the amplifier.

High current ac to dc converter......Converter will plug directly into wall socket. Possitive lead from converter to amp, same with negative for power. Run speaker cables from amp to subs. for signal, if your home audio video unit has a sub out, use that and some y adapters from av unit to amplifier.

LOL!!!!