Riley Evan Houser

Yeah man, I dont do comps either but I'm pushing two Sa15s on a Soundstream TX1.2000D, did the big 3 AND am putting in the second battery in a few days. The second battery takes stress off of your first battery and off of your alternator. When the bass is hitting it's like kicking your alternator straight in the nuts unless you have a HO alt, henceforth the second battery

X2

Update, added two 2x2 round dowels and screwed the top lid down in a few more spots. Success

Okay, well thanks guys. I'll switch the subs soon. Have to work in a little bit but will let you all know when I do. Thanks again!

I will take som pictures after bit. Could it have anything to do with the fiberfill.in the box?

I appreciate the help man nothing I can see or find.. Box has a shiz load of fiber fill also so I don't think anything would rattle if there were something rattling.. Well maybe someone more knowledgeable can help you here but....If it comes down to it, maybe a video to explain this "rattling"? I hope it's not a 'knocking' bottoming out sound I previously thought it was the sub.. But now i'm just beginning to think it's the box, the sub is fine in free air. Thats why I think it's the box

I appreciate the help man nothing I can see or find.. Box has a shiz load of fiber fill also so I don't think anything would rattle if there were something rattling..

With or without screws it sounds the same.

Hmm.. I just I was just pointing fingers at the sub! But, it sounds like i put a screw on the top and let it rattle around..so I'm assuming it's the sub. How can I tell for sure?

I feel ya man, but even when i just set it in it rattles. I'll have the top side of the sub in and the slowly set the other side down and it begins to rattle. Should I put sound deadener on the "ring" of the subwoofer? Would like help? Or should I just call Sundown?

38" wide, 28" deep, 14.75" tall, Soundstream tx1.2000d, 5.5" wide with a 2" L port. Subs are mounted on top, are each getting about 500 watts rms until I put in my second battery and do the big 3

I have 2 SA15s in a ported box tuned to 30 hz. The sub that is on the right doesn't rattle or anything, but the sub on the left rattles when sitting the enclosure when it hits lower notes. I take it out to check to see if it still does it in free air but it doesn't, only in the box. Why would that be? Why just one and not both? If someone could help me that would be great. Thanks!

It is 1 ohm stable, 700 rms at 4 ohms, 1300 at 2 ohms, and 2000 at 1 ohm

Soundstream TX1.2000D

Would like to do a power supply upgrade and upgrade the capacitors, maybe more.. Not sure. I really just want to push 3500 at 1 ohm

To upgrade specific units in the amp, the capacitors and all that good stuff

Hey everybody, was wondering if anybody has had their amps modded and if so by who? How much did it cost and what did you get done?

Bump

And, if you have 2 ohm DVCs you can't wire them to 1 ohm, you can get them down to .5 ohms

Oh lord..

A crescendo BC2000D would also be realllllllll nice

Keep the offers coming!

What do you have to offer?

What do you have to offer?

I.hope so, would REALLY love a saz 2500