BenzBass

I could go 6" wider but I would like to keep my current dimensions instead of having to buy all new wood Here is a suggestion, took the 6" wide and 1" deep to reach the spec, hope you can fit that: Enclosure Specifications: Fb = 36 Hz Vb = 2.5 ft^3 External Height = 13.5 in External Width = 36 in External Depth = 17 in Port Width = 3 1/2 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Front & Back (3 parts) = 36 x 13 1/2 Left & Right Sides = 14 3/4 x 12 Top & Bottom = 36 x 14 3/4 L Port Internal Assembly Parts: Front to Back = 11 1/4 x 12 Extension = 10 13/16 x 12 Assembly guide (generic dimensions): Let me know any questions. Thank you very much Joe!

After trying to install Torres for a good while, I've had no luck. Anyone feeling nice today and want to design a box for me?

Ahh thank you, I'll work on doing that today

It will be running at 1ohm off of a Hifonics hfi2000d, so it will probably be running 1700-1800 maybe less since I'm pretty positive that amp doesn't do rated.

Yeah...at this point I'm probably going to have to go back to the drawing board. So if I were to start over what should my dimensions look like? I heard from audioque that the 12" does well in a 2.2 cubic foot box, but I also heard from people that have it that it does well in a 3 cubic foot box. So I'm basically lost overall. Still really new to all this car audio stuff.

I've got everything cut out, I just need to figure out what length to make the port walls

Anyone else able to help?

I could go 6" wider but I would like to keep my current dimensions instead of having to buy all new wood

I know someone has some answers for me

I need some help on a box I'm working on for a single AQ HDC3 12. I have a mac so I cant download Torres but I've been going between bcae1.com box calculator and the re audio box calculator. Both have me relatively lost so basically I need some help figuring out tuning. The box's dimensions are 30" wide, 16" deep and 13.5" high. I don't really know all the technical terms, so bare with me please. The first port wall (the one that is connected to the baffle or the front or whatever you call it) is 10" long and is 5" away from the side of the box, then the next wall making the L is 15" long. I hope that makes sense. I need someone to help me out with what my frequency is and what determines making the frequency higher or lower? I hope I can get some help

Now is anyone able to identify the amp? The guy is telling me its a 800 watt gold series amp, haven't been able to find anything else out about it. Any help?

I would get these just to resell, I'm trading something for them potentially, but I'm trying to figure out if its that worth it gotcha. well, i guess im not an expert on MTX. if they arent what all the high school kids want in your area dont get them ahha. Haha, well theyre all into name brand, I just wanna be able to hook them up to my amp so I can sell them better without having to worry about blowing them, or tearing a spider

I would get these just to resell, I'm trading something for them potentially, but I'm trying to figure out if its that worth it

I'm not sure, might be dual 4. Im just trying to get some info on them before I go and check them out tomorrow

If I were to run 2 in parallel and one in series, would it run at 1.5 ohms? And would that be fine on a hifonics hfi2000d

I need some help identifying what kind of MTX subs these are If anyone could give me the name and some info on them I would highly appreciate it.

If someone can't photoshop it for you go to lowes or home depot, buy a can of this stuff called plasti dip, spray it on, and if you don't like it you can peel it right off. There are a Ton of YouTube videos about it

Strategically place mouse traps. Or things to stub their toes on, a stubbed toe is no damn joke.

Shoot them in the testicles to remove their kind from the gene pool

I'm kinda lost with what your saying but this is my interpretation which may be far off. So I would buy two, and One of them I would plug the male say into the white plug, then the other one I would plug into the red? Hope that makes sense

I mean, why wouldnt you?

Could you get me a link? http://www.parts-express.com/pe/showdetl.cfm?Partnumber=240-125 Sorry I gave you the wrong link the first time. You need the single female to dual male. This is the correct link OP Do you currently have a sub amp hooked up? And will you be requiring all 4 channels plus a sub output? Yes I do have a sub amp hooked up and yes to the second(I think).

How many dollars is 1001000w?

No vs. threads because most likely either one will suit what your looking for.

Mine as well get a new head unit at that price... You can seriously get a new headunit for $102? I mean if I got $50-75 more then yeah I can.