XtremeSPL-SCAMMER

i have a Nvidia GeForce card that i love.. they are a bitchen ass card and they are compatable with mac and pc. They are great for watchin dvds and playin video games. I have 10 different screen resolutions from 800 x 600 to 1920 x 1440 .. i have dual monitor outs and as well as svideo out.

negitive... Anyway.. so today was a pretty easy day. I rode around in a truck with a crane on it, and we went to pick up a scrubber. and after that we went back to the yard to park the crane truck and got a service truck. By the time we got back to the job site it was lunch time, and we just ate while we worked. I was using a pipe cutter and threader machine on the back of the work truck. We measured the lengths and then i cut the pipe at the mark and threaded it. I was doing that and then working on useing a monkey wrench to turn tighten everything. i worked from 7a to 5:30p. so.. i did a bunch of work today and motivated. I also dug a trench with a pick for 20 ft. The work is easy. i rode around a lot and drove some. so. all in all, i say it was a awesome first day. cant wait to go back in the mornning and do it all over.

you talkin about lsn2meboom916??? if so i can call him. i have his number right here

yeah.. my fiance hs was like that.. you had to write a truancy paper on why, and why they should give you credit and not take everything away from you.. my finace lived with me at the time, i went into that hs and told them why she wasnt there, and told them what they could do with the paper..

ohh yeah.. i cant wait to go to work, and then to come home.. I have to install my amp, rcas and remote wire. and i am done til sunday. so.. I wanna get it done.. so.. i hope today flies by, and i am in bed by 8:30pm tonite

be careful.. i almost didnt graduate cause i was at the limit of couldnt miss another day.. if you miss over 5 days in a semister they take credits away.. i dont know how schools work out there in Ga.. but here in cali they are dicks.. i am glad i graduated and out.. now the hard reality is.. i gotta work, make a living... no more free ride in high school.

was up at 5:30a to get ready for work... still fawkin dark... what the hell gettin ready to leave here in about 20 minutes..

is your mommy gonna write you a note for missin today??

what was the chicks nickname here on SMD?? the pics i seen all had steves shit on it.. thats hella fucked up.. wrong in so many ways.. i dont think i wanna post pics anymore.. :I

well tomorrow is my first day at work... start at 7a ... i will be on tomorrow to post my first day

he bought the rimms and thought they would fit on his 94 cougar but his cougar is a 5x4 so... they are just sitting in our home office collecting dust. we only have 1 center cap.. the other 3 never got delivered with the rimms.. so.. here they are. they are located here in Northern Cali. at 95917. Prefer Local SALE..

my room mate ( NorthSydRyd) got some rimms and he wants to sell them.. instead of him posting them i am doing it for him. So he is askin $300.00 for them. They are 17" Chrome Rimms. 5 x4.5 and 5x5 .. Front tires are 205x50x17s Rear Tires are 225x45x17s will fit eclipses, mustangs, rangers.. and tons more..

are you sure it was the earthquake j/k EDIT: damn spl guru beat me to it...

should of threw the subs in yesterday i am jealous i didnt get to hear it in person... you gonna throw the truck up on your term lab to see what kind of numbers you are doing???

i was there at sound solutions for a few hours today.. while they were doing all the vinyl and carpeting.. that box is freakin heavy as a mofo... but it was worth it. got to hang out with rusty and freddy for a minute. i wish i was there tomorrow to get to hear the subs fire... but i guess i will have to wait for next sunday to hear it. Thanks rusty for letting me chill with ya.. everything looks excellent.

drunk in public and minor in possestion is a misdeameanor here in California.. has a max of 6 months in county ail and 1500 in fines. i dont know about where you are..

not hard at all.. take off the inside door cover usually 9 screws. then you unhook the lever that goes from the door handle to the locking mechanism. take out the 2 small bolts that hold that door handle in place. then once the door handle is out get some scrap metal and a bench grinder. hold the metal up to the hole where the door handle use to be, and see how much you need to shave off that peice of metal. then start grinding a little and go back to fit that peice.. it is a lot of grind and compare.. once it fits inside that hole tack it inplace. I never weld it completely cause the door will heat up and you can warp it. also wreck your paint job.. then i get some fiberglass and bondo to cover it.. sand it smooth.. and primer it. to see high and low spots.. and keep sanding.. once you are close to where you want it i use a fine sand paper to get me the rest of the way and then to smooth the look then primer it so you arent looking at fiberglass or bondo and you are done. then you have to hook up a door popper to open the doors.

heheh.. when you gonna have the 4 10 enclosure from the paint shop???

you gonna have the truck at the shop tommorrow??? i am goin to fernley to get my fiance is there anyway i get a demo from the van or something... i am gonna have 3 hours to kill... what a better way to see my buddy rusty

this is my old 95 neon i had.. BAGGED REAR

yeah... i loose motivation easy

it aint much... but it is a new car for me to do something with... 95 Neon 5 speed pick it up saturday.. so.. i am going to shave it all the way around. maybe do a body kit. bigger rimms. take out the back seat, install either 2 12's or 4 15's.. use the back trunk area for amps. and another battery. so.. hope to have it going soon. I need to put in a rod bearing kit in it, and couple small minor things..

like i said i am a welders assistant. Basically it starts off with setting up the drills to drill down in the earth to find pockets of natural gas. once they would it, they then setup a gasline to get the gas from out in the middle of no where to the city to use the natural gas, or to tie it into another prevoius gas line. so the welders use a stick welder fuse the 2 poles together.. it has to be welded perfectly so natural gas doesnt escape and explode so.. basically once the welder welds, i go behind him and clean the metal with a wire wheel so you can inspect the welds. when you use a stick it leaves a shell on top.. so it all has to come off. it pays 10.00 a hr started out. after 90 days i get all my benefits and a raise. so. My dad started out with the company as a truck driver just hauling equipment. they paid for him to go to school and attend school to get his crane operatoer lic. and now he has his own company truck, that he drives home every day, and they gave him his own gas card for deisel. They told me once i am a welders asistant, if i want to become a welder they will send me to school to get my lic, and then if i wanted to learn to drive and haul equipment, they will pay for me to go to truck driving school, and pay for my lic, and pay for my physical, and everything. it looks like a good company to get into. since they are willing to do so much.

so.. i havent worked or brought home a pay check since feb. besides doing some under the table work.. i have been looking and looking, and calling my boss that laid me off for doing demolation. and every week i call to check in, he tells me to call at the end of the week or next week or something.. so... Yesterday i had a job interview with a temp agency to place in me a crap job to make some kind of money. and after that i came home, and my dad got a hold of me on nextel and asked me if he could get me a job where he works if i would take the job or fu&* it off.. and i said if he got me a job i would work it.. So, couple hours later he nextels me again, and said he talked to the owner of the company and for me to nextel him and talk to him.. so i did, and he wanted to know if i was available for an interview on friday or monday. and i said i am available and looking for work tomorrow, friday and monday.. i said whatever is more suitable for him i would be there for the interview.. and he said ok come in tomorrow at 8am. So i showed up this mornning at 7:30a and the secretary asked me how i was, and what i needed, and i said i had a 8 oclock appointment with so and so.. so i go straight back and he tells me about the job that i already knew. and said ok, i will see you monday at 7am for you to start. i was out of there by 10 minutes. the company drills for natural gas. my dad is a crane operator, and sets up these big drillers to drill down in the earth for natural gas. i am a welders assistant. once the welder welds the pipes together to get the gas out of the whole and to the citys, i go go after home and buff the welds out. so. it is year round work, no lay offs, no slow times.. steady work..

as much as my fiance gets on my nurves, i would never be gay... i am with the other dood.. i would rather wack off for the rest of my life then some dood pluggin away in my butt and gettin a reach around at the same time.. no thank you.. I love the pink taco.. if not with one girl... i can find another... but on topic..... i dont think there are any gay people on SMD.. atleast none have came out the SMD closet.. i dont think they are into car audio.. it may not be all that super or Fab-u-lous to them..