Search the Community
Showing results for tags 'caraudio'.
Found 3 results
I have a single 12" american bass godfather DVC 1ohm subwoofer and a Audiopipe 1800.1d mono amplifier to power the sub. Head unit is typical pioneer deh3500 model. This is in a 06 Ford Escape XLT, needing suggestions and ideas on a box build for this setup. I'm open to any idea's except, sealed enclosures. Seems to look like it'll be easier to blow a sub using a sealed enclosure . Keep in mind the Escape is my daily driver. Thank yall for any tips or ideas.
Question for any person, I'm building a box for a friend. He has 2-JL Audio W7(not the AE) svc 3ohm subs with a Taramps 5000.1 mono but switching to a JL 1000 mono amplifier. He wants a sealed enclosure but he likes loud so I suggested a ported box. Doesn't want that, so I had mentioned having both types either going 4th order being sealed and ported or go with a 6th order. By experienced ppl out there, which type enclosure would be best for these 2 12W7's? The system is going in a 06' Buick Regal. Thank yall if any ideas on this
i was thinking that someone should make the a new DSP for everyone to use for car audio. alpine won't talk to me about it. and I'm looking for someone to step up. and build the best DSP in the world. hi my name is rob simon and I’m opening a business to sell car audio. and like to buy and use car audio too. all the DSP’s in the world are no way near as nice a what i want a DSP to do. and i am coming to you guy for some help with a new DSP. the PXA-H800 is getting old and its time to retire it for good. and make a hole new DSP with some of the old fetchers as the PXA-H800, but bigger EQ's and more EQ’s and more Adventist filters and the list goes on.i have looked at other DSP on the market and i think they can’t be put the fetchers somewhat together and new stuff on the DSP to make one kick ass unit with all the DSPs in the market are obsolete for years now and some have built new products that came out this year were obsolete before they were designed. I’m also in to Ground Zero Audio and Morel Audio. as well as Alpine and i like 3 way component sets with out a crossovers so the 3 speakers would have 3 channels of outputs on the DSPs in link mode for the amplifiers to hook too. its good with pro audio speakers with 6-way speaker set up hex-a-amp or hex-a-wire with 8 channels of 6 DSPs in link mode you will have 48 pre-out outputs more then a naff outputs. i will be using the E3iO windows 10 based double din computer in the dash. WIFI audio streaming and DSP controlling from IOS/Android/Window/Mac XOS USB Computer link for Windows and MAC optical Toslink inputs and output for audio playback and link mode DSP link mode to link up DSPs for more outputs low level 3 sets RCAs inputs 8v 8 outputs RCAs in 1 DSP fresques respuons 5hz to 25khz crossover: off/on / Low pass/ high pass/ band pass, selectable on each channel 5HZ to 25KHZ -6db/-12db/-24db/-32db/-46db/-64db parametric EQ 52 band 5HZ to 25KHZ on main and each channel graphic EQ 52 band 5HZ to 25KHZ on main and each channel DTS 5.1 Dolby Digital 5.1 Dolby Pro Logic 2 Imprint with mic audio zoning front rear side to side optional RUX-C800 type updated display Bi-Phantom function High Res audio (DQA format) subwoofer VOL and Xover off/on for sub’s surround sound/mono/stereo on/off for any channels and mapped out on Alpine’s apps as surround subs. main subs no surround sound for the DSP more fetchers like the h701 and h800