SPL Tech Posted February 17, 2011 Report Posted February 17, 2011 (edited) Does anyone make an interface to allow an aftermarket headunit to turn on with the factory ACC? It looks like the stock headunit is activated either by data or via a low voltage signal, in either case I am having to hook the ACC wire on the aftermarket headunit up to ignition to get it to turn on. I would like to be able to use the headunit when the key is in the ACC position instead the of ignition position. Edited February 17, 2011 by SPL Tech Quote
huh?do-what? Posted February 21, 2011 Report Posted February 21, 2011 Does anyone make an interface to allow an aftermarket headunit to turn on with the factory ACC? It looks like the stock headunit is activated either by data or via a low voltage signal, in either case I am having to hook the ACC wire on the aftermarket headunit up to ignition to get it to turn on. I would like to be able to use the headunit when the key is in the ACC position instead the of ignition position. can you find anything in the fuse panel that stays powered in the accessory position? Quote God damn its hot today. My balls are stuck to my leg.
fli_noize Posted February 22, 2011 Report Posted February 22, 2011 This is what your looking for. Gives you all the wires for hooking up NAV too http://www.metraonline.com/part/XSVI-9003-NAV Quote Bone Stock 2006 Dodge Magnum SRT-8
fli_noize Posted February 22, 2011 Report Posted February 22, 2011 Furthermore, be careful poking around the 12v system in that car. The canbus in those cars is very sensitive. Quote Bone Stock 2006 Dodge Magnum SRT-8
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.