MrEwubbsZ Posted March 27, 2011 Author Report Share Posted March 27, 2011 Oh yeah thats another question. Sense im going to have 2 subs in one box does that mean im going to need double the cubic feet for the box? So with 2 subs im going to need 8-20cubic ft? Quote 2000 Ranger Build Log Link to comment Share on other sites More sharing options...
fox_racin4 Posted March 27, 2011 Report Share Posted March 27, 2011 (edited) You dont have enough room, i have my btls in 13.8 cubes. after all displacements. and i think its a bit on the small side Edited March 27, 2011 by fox_racin4 Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Chubbzzzz Posted March 27, 2011 Report Share Posted March 27, 2011 You dont have enough room, i have my btls in 13.8 cubes. after all displacements. and i think its a bit on the small side Is that true? Quote Link to comment Share on other sites More sharing options...
P4killer_ Posted March 27, 2011 Report Share Posted March 27, 2011 Yes this true... I mean generally speaking 12's 2-2.5 cuft , 15's 3-5 cuft, 18's 5-8+ per woofer any obviously it depends greatly on the woofer, and what your trying to accomplish with your build. You could put them in a box on the smaller side, say 4-5 cuft per woofer. but in my experience cramming woofers into barely or even less than enough airspace isnt ideal. Give em some room to really breath and do work if the specs say 4-10, you could do it, would it be ideal? prolly not. would it sound much better and be louder with more airspace? most likely yes Quote Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
STEvil Posted March 27, 2011 Report Share Posted March 27, 2011 With an AQ3500 to each you should be ok with the slightly limited airspace. Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
MrEwubbsZ Posted March 27, 2011 Author Report Share Posted March 27, 2011 Yes this true... I mean generally speaking 12's 2-2.5 cuft , 15's 3-5 cuft, 18's 5-8+ per woofer any obviously it depends greatly on the woofer, and what your trying to accomplish with your build. You could put them in a box on the smaller side, say 4-5 cuft per woofer. but in my experience cramming woofers into barely or even less than enough airspace isnt ideal. Give em some room to really breath and do work if the specs say 4-10, you could do it, would it be ideal? prolly not. would it sound much better and be louder with more airspace? most likely yes Yeah i see what you mean. well thanks for the help everyone. and anymore comments from your guys experiences with building boxes are always welcome. lets problems i have the easyer it will be lol. Quote 2000 Ranger Build Log Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.