HotRodHam Posted April 3, 2011 Report Posted April 3, 2011 ok so i have a walmart battery that doesnt have + and - terminal screw things on the top would i be able to put some on the sides and cut/strip the wire back on the + and neg going to my battery right now and connect them to a neg and pos terminal? if u dont get what i mean ill get some pics... ill get them now just incase Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200
bassrace Posted April 3, 2011 Report Posted April 3, 2011 Yea idk what exactly you mean pics would help. Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
HotRodHam Posted April 3, 2011 Author Report Posted April 3, 2011 bettery is like this wires r like this with another wire coming out of the power and 2 negatives coming out of the negative that r grounded to my car positive wire is running off of that little gold screw on the top. but isnt there a negative coming from the alt too? or not Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200
Azagtoth502 Posted April 3, 2011 Report Posted April 3, 2011 (edited) You need something like these http://www.darvex.co...inal-14p241.htm Edited April 3, 2011 by azagtoth502 Quote pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls
bassrace Posted April 3, 2011 Report Posted April 3, 2011 No the alternator does have a ground wire it gets grounded by the engine. And any positive or negative terminal on the batt can be used as long as its the right one Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
HotRodHam Posted April 3, 2011 Author Report Posted April 3, 2011 (edited) You need something like these http://www.darvex.co...inal-14p241.htm and with that i just replace the bolt thats in the wire holder right now? and then just get a end on the 0g and put it around that bolt and tighten down? and wats a site that has some cheap 300A 1/0g fuses and some cheap 150a 4g fuses and wire Edited April 3, 2011 by HotRodHam Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200
bassrace Posted April 3, 2011 Report Posted April 3, 2011 That would be fine Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
bassrace Posted April 3, 2011 Report Posted April 3, 2011 O and knuconcepts is prob got the cheapest wire Quote 145.9@40hz 145.3@34hz big 3 X2 group 34 Deka Group 31 All 0/1 awg jl meta wire Alpine CDA 7894 Orion HCCA D5000 2 AQ HDC312's Crunch gpv1100.2 (for 6.5"s only) AQ pro audio 6.5" - 3 sets AQ supertweeters - 2 sets 2000 Slamry
Azagtoth502 Posted April 3, 2011 Report Posted April 3, 2011 Same site I showed you has fuses too Quote pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls
HotRodHam Posted April 3, 2011 Author Report Posted April 3, 2011 Same site I showed you has fuses too found it... but i didnt expect fuses to be that expensive haha. pretty sure the electrical is the part of the system that will run u about the highest Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.