Severyn Posted April 11, 2011 Author Report Share Posted April 11, 2011 This explains it good thank you, this really helped a lot Quote Link to comment Share on other sites More sharing options...
kickass audio Posted April 11, 2011 Report Share Posted April 11, 2011 go here, this is where i bought my tpi 440 scope from along with my clamp meter. http://www.testextra.com/tpi/pages/tpi_440_1mhz_handheld_oscilloscope_true_rms_dmm.htm Just that package comes with the scope, charger, test leads, test clamps, carrying case, rubber protective boot/stand, and manuals for it. Its only $299.99 and they have a damn good warranty for them and they shipped fast for me plus its really cheap if you ask me. I also bought this with it: http://www.testextra.com/tpi/pages/tpi_a296_ac_dc_clamp_on_high_current_probe_adapter.htm Its a clamp meter you can hook up to your oscope and use it to measure current draw in your ac and dc power lines. Its a necessary tool when you want to figure out impedance rise and how much current you are really drawing with your system. Plus its great to troubleshoot problems with current draw too. I got both those at the same time and it came with everything you need to get the job done. I use the scope all the time, more than i thought i would and its a great product. If you get it and need help using it give me a holler, ill help you out with it. Its super easy to hook up to, it even has a help button to tell you where you should have your leads connected on the unit and what range to start at before you test something. It is a really outstanding unit and i love mine. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.