kickass audio Posted August 10, 2011 Report Share Posted August 10, 2011 Alright so a week ago i finally completed my new system build. As i said i would i didnt stop and take any pics of the build progress as there was just too much to stop and do and i wanted it done before i had to go back to college in another 2 weeks. I only have pics and vids of the system completed right now and hopefully next week (if the shop near me gets it to their other shop) i will have it on the termlab to see how much DB's it puts out Heres a run down of what i have installed in it all (its also in my signature too btw) Subwoofer: Ascendant Audio SMD 18" Dual 1 ohm coils wired to .5 ohms Subwoofer Amplifier: Two Massive Audio DB8000 amplifiers wired to .5 ohms strapped. Clamped at 4049.2 watts at a 1.48 ohm rise load. Subwoofer enclosure: 5.5 cubic foot net tuned to 30Hz designed by RAM Designs (look him up on here, great guy), double baffle front, braced port and top and bottom, sub and port back design, made from 3/4 inch thick Birch Plywood Mids and highs amplifier: DC Audio 175.4 with the 6.5" speakers wired in parallel per side down to 2 ohms before imp rise and the highs to 4 ohms each tweeter (channel 1-2 are for the mids, channel 3-4 are for the highs) Mids and highs speakers: Rockford Fosgate T1652-S component speakers running full active Headunit: Alpine IVA-W205 with custom background and ipod dock. Sound processing: Rockford Fosgate 3sixty.2 sound processor Power wire: Tsunami 1/0 competition OFC cable, Audiopipe 1/0 competition OFC cable, Rockford Fosgate 1/0 OFC cable, Rockford Fosgate 4 gauge OFC cable Speaker wire: Tsunami competition OFC 8 gauge cable, The Install Bay 14 gauge OFC cable RCA wires: Monster Cable 6 channel twisted pair RCA cable, Rockford Fosgate twisted pair RCA cables Sound deadening: none currently but i have Second Skin Damplifier Pro coming for my liftgate Batteries: One XS Power S3400 battery under the hood, 4 XS Power D3100 batteries in the rear 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
kickass audio Posted August 10, 2011 Author Report Share Posted August 10, 2011 and so everyone knows, i am uploading the vids and pics of it right now but youtube is being slow so it may or may not play them. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
corey0928 Posted August 10, 2011 Report Share Posted August 10, 2011 Your only getting 4000 out of 2 amps? That seems off or the rise is higher Link to comment Share on other sites More sharing options...
kickass audio Posted August 10, 2011 Author Report Share Posted August 10, 2011 Here are the pics and vids enjoy!! 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
kickass audio Posted August 10, 2011 Author Report Share Posted August 10, 2011 corey, it is fine considering at 1 ohm, each amp puts out 2kw rms so strapped it will be 4kw. and i know the damn pics didnt work, ill try again 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
kickass audio Posted August 10, 2011 Author Report Share Posted August 10, 2011 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
SPLadd1ct Posted August 10, 2011 Report Share Posted August 10, 2011 Looks great bro! Now gimme a demo 2011 Ford Ranger Sport 4.0 v6 2 sundown audio prototype nsv4 15s crossfire 4k wired to 0.4 ohm 15 banks of maxwell 3.0 caps @ 18v triple alts (x2 us alt 250's, x1 singer 320) 153 at 23hz Link to comment Share on other sites More sharing options...
kickass audio Posted August 10, 2011 Author Report Share Posted August 10, 2011 If i could get down to you i would in a heartbeat. Maybe next summer when im done with school i can take a week off and we can meet and slam our systems. It would be sweet if we could get a competition going between us. lol 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
corey0928 Posted August 10, 2011 Report Share Posted August 10, 2011 corey, it is fine considering at 1 ohm, each amp puts out 2kw rms so strapped it will be 4kw. and i know the damn pics didnt work, ill try again Gotcha. Everything looks nice and loud! Link to comment Share on other sites More sharing options...
kickass audio Posted August 10, 2011 Author Report Share Posted August 10, 2011 Thank you sir, it is pretty loud. It has a decent amount of airflow for a single 18. I held the install guide for some new sensors i got for my alarm today in the window and it moved a little but not a ton, It was folded 5 times so idk but its great for my liking, just gotta deaden the lift gate since that rattles to all hell and ill be done. Also, this is my first 100% build i did, before i used the prefab boxes while i was learning everything about box designing and building and then i bought all the things i have in my truck now and did it all with me and my dad. 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.