wafsman Posted April 16, 2011 Report Posted April 16, 2011 So I just made this box design and I need some help finding out how much space is inside the box and what frequency this will come out to be. All the wood is 3/4" thick and the speaker will be a 12" Diamond Audio TDX. Specs for the speaker call for one port 17.5" length and 4" port i.d. tuned to 33 hz with 1.2 cu ft for the speaker, trying to get as close to this as possible. By my rough calculations I'm getting about 1.3 cu ft minus the port area and speaker displacement, which is .13, for the side with the back of the speaker. Don't know how to figure out what frequency that comes out to though. Figured I could take the piece that is 10" and adjust it accordingly to get the frequency I need. Please let me know what you guys think and any help is greatly appreciated. Thanks. Quote
wafsman Posted April 17, 2011 Author Report Posted April 17, 2011 Hopefully I explained everything the right way and gave you all enough info. Quote
bumonskateboard6 Posted April 17, 2011 Report Posted April 17, 2011 That looks like some interesting 6th order setup... not exactly a simple ported box. You can read about 6th order stuff here: http://www.diysubwoofers.org/bnd/6thorder.htm but unless you're planning on doing some math I'd say stick to sealed or ported Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also?
Maxim Posted April 17, 2011 Report Posted April 17, 2011 (edited) It's a dual-reflex bandpass, referred to as a 6th-order bandpass. I don't have nearly enough understanding of bandpass designs other than simplistic 4th orders to be able to tell you tuning frequency or much anything else about it. Edited April 17, 2011 by Maxim Quote wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt
TheyDontWantMusic Posted April 17, 2011 Report Posted April 17, 2011 very rough calculations, its tuned to fail. 6th order bandpass, one chamber is 3cuft tuned to 91Hz, the other is 1.8cuft tuned to 60Hz. Quote
wafsman Posted April 17, 2011 Author Report Posted April 17, 2011 That's not even close Yeah this design came from an idea my friend had about duplicating an enclosure he has in his home setup running an 18 because he likes the way those sound. So we shrank the dimensions to fit in his car and tried getting somewhat close to matching the specs of the speaker. We can see how well that turned out I think he's gonna have to go back to the guy that built the 18 enclosure and have him adjust it to fit a 12 and fit in his car. Thanks for all the help and I will keep you guys updated on how this box turns out. Quote
TheyDontWantMusic Posted April 17, 2011 Report Posted April 17, 2011 do you have any pics of the 18inch box? its either a 6th order bandpass, or some kind of waveguide. Quote
wafsman Posted April 18, 2011 Author Report Posted April 18, 2011 I can take a pic of the box, but it will only be the front of the box, it is buried in a wall of speakers. I did make a sketchup model of the 18 box though, I will post up some pics later. Quote
wafsman Posted April 19, 2011 Author Report Posted April 19, 2011 Sorry it took me so long to get the pics, but here they are. A sketchup model with dimensions, a pic of the front and a fun little pic to show you all what we jam on Enjoy. Quote
TheyDontWantMusic Posted April 19, 2011 Report Posted April 19, 2011 I assume there's actually a port along the bottom 5inch wide opening, not just a single layer of MDF, as there's a row of screws along the top... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.