New Box Design...Will It Work?

[Jmoney2544]

All the Dimensions Are On The Sketch Except For The Height Which Is 17".

Check Top Of Paper For Cubes, And Tuning.

http://s303.photobucket.com/albums/nn150/Jmoney2544/?action=view&current=ham020.jpg

[speedball1978]

lmao!!! same design different spec.. wtf dude, get the port on the same side of the subs...

[speedball1978]

try again

[Jmoney2544]

lmao!!! same design different spec.. wtf dude, get the port on the same side of the subs...

the port wall doesnt extend to the one side 7". not the same

Edited April 18, 2011 by Jmoney2544

[Jmoney2544]

try again

need at least a 6" port width for these subs. cant do it in the front. i might try triangle ports

[speedball1978]

thats the design i got.. 6 in port in the front with the subs...

[speedball1978]

[Jmoney2544]

thats the design i got.. 6 in port in the front with the subs.

total sub diameter = 15.75"

15.75" x 2 = 31.5

31.5 - 36 = 4.5"

cant do it

[speedball1978]

actually more like 5 .. oops.. but it should do the trick.. if you're gonna require a 6 inch port.. then go with smaller subs bro.. otherwise good luck

Edited April 18, 2011 by speedball1978

[Jmoney2544]

actually more like 5 .. oops.. but it should do the trick.. if you're gonna require a 6 inch port.. then go with smaller subs bro.. otherwise good luck

you think 5" will be good for no port noise with a 6 cube box