bigaltexas Posted April 21, 2011 Report Share Posted April 21, 2011 was running a powerbass xa4000d off 2 batteries.. know i gotta step up the batteries, can anyone give a word of advice on what i should get? been looking at the xs power d3100 Power Cell 5000 Amps, but how many would i need do yall think? also going to be running the d2 smd at .5 ohms i believe? got both the positives coming together into 1 wire and both the negatives coming into 1 wire.. thats .5 isnt it? anywaysss, thanks yall.. Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted April 21, 2011 Report Share Posted April 21, 2011 You can only run a D2 sub at 1 or 4 ohms. But yes you are running it at 1 ohm currently. If you want to run a 4500D I'd suggest upgrading your front battery to the largest XS power that will fit in the stock location, as well as 1 D3100 in the back, and 2 runs of 1/0 to wire them in parallel. Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.