dirtracer27x Posted April 25, 2011 Report Share Posted April 25, 2011 ok so i decided to free up some room under the locker in my boat.building a fiberglass enclosure.check it out,started with some cardboard templates,then cut and fit all my peices.then i rounded all me edges and fit my ring and fleece,right now i have finish my first round of resin.ill post some more pics as i go.this is my first attempt,going good so far. alpine 794 h/u 6 crescendo ccx 6.5 comps 4 polk db 6x9 3 ways 2 jl audio OG 12w6 v1 1 jl audio OG 10w6 v1 1 soundstream rubicon rubi5.800 5 channel 1 soundstream rubicon rubi2.600 2 channel 1 soundstream rubicon rubi800.1 mono class d 1/0 knu 6 farad soundtream cap soundstream bx 10 soundstream 3 way xover Link to comment Share on other sites More sharing options...
blownengine Posted April 25, 2011 Report Share Posted April 25, 2011 Lookin real good! 2003 Dodge Ram 1500 SLT (Yea its got a Hemi)Alpine CDA-105KnuKonceptz 0ga CCA Big 3 with Yellow Top 15" SoundQubed HDC3DC Audio 1.2K (Bass)Pioneer 6x9's (Front)Pioneer 6.5's (Rear)Kicker 3.5's (Dash)Sony amp on the highs. (Hey it was free) Link to comment Share on other sites More sharing options...
illiniboy17 Posted April 25, 2011 Report Share Posted April 25, 2011 looks pretty sweet man nice work! Car: 1995 Thunderbird System: Pioneer deh5100ub HU Pioneer/Lightning Audio 5x7's 1 Hifonics 1610D amp 2 Obsidian Audio 12's 4cu.ft. box tuned to 30hz 8 farad Boss Audio cap 4 gauge power/ground wire Youtube Facebook Link to comment Share on other sites More sharing options...
BlitZ Posted April 25, 2011 Report Share Posted April 25, 2011 looks real clean... old set up Alpine IDA-X305S Memphis M-Class 4x6" Focal Access 6.5" Hifonics BRZ2100.1D 2x DC Audio Lvl 4 15's Big 3, DR44 Alt, Yellow Top http://www.youtube.com/user/SicNoma003 Link to comment Share on other sites More sharing options...
dirtracer27x Posted April 25, 2011 Author Report Share Posted April 25, 2011 thanks guys,first timer here lol.was into audio back in the early 90s,put a stereo into my ski centurion so i decided to try and get fancy.i had a box for my 12w6 in there but just took up to much room. alpine 794 h/u 6 crescendo ccx 6.5 comps 4 polk db 6x9 3 ways 2 jl audio OG 12w6 v1 1 jl audio OG 10w6 v1 1 soundstream rubicon rubi5.800 5 channel 1 soundstream rubicon rubi2.600 2 channel 1 soundstream rubicon rubi800.1 mono class d 1/0 knu 6 farad soundtream cap soundstream bx 10 soundstream 3 way xover Link to comment Share on other sites More sharing options...
Azagtoth502 Posted April 25, 2011 Report Share Posted April 25, 2011 Looking great so far. pa-pa-platypus sorry not everybody has a companies nuts so far down their throat they catch every drop ball sweat when it falls Link to comment Share on other sites More sharing options...
dirtracer27x Posted April 26, 2011 Author Report Share Posted April 26, 2011 just got done with the reiforcing on the insidembut not sure on how many layers i should do.i have put down about 2 yards so far,is that enough,or is more gonna sound better.also when i woke up this morning my resin was dry,but i could move the fleece alittle.is that normal until reinforcing is done and body filler is applied? alpine 794 h/u 6 crescendo ccx 6.5 comps 4 polk db 6x9 3 ways 2 jl audio OG 12w6 v1 1 jl audio OG 10w6 v1 1 soundstream rubicon rubi5.800 5 channel 1 soundstream rubicon rubi2.600 2 channel 1 soundstream rubicon rubi800.1 mono class d 1/0 knu 6 farad soundtream cap soundstream bx 10 soundstream 3 way xover Link to comment Share on other sites More sharing options...
Audio-Concepts Posted April 26, 2011 Report Share Posted April 26, 2011 I usually run about 5 layers 1/4"-1/2" thick, then duraglass, then bondo, then glaze! After that the front baffle is about 3/4" thick and ready for paint!! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
dirtracer27x Posted April 26, 2011 Author Report Share Posted April 26, 2011 do you do it all at one time?or do you have to layer and dry? alpine 794 h/u 6 crescendo ccx 6.5 comps 4 polk db 6x9 3 ways 2 jl audio OG 12w6 v1 1 jl audio OG 10w6 v1 1 soundstream rubicon rubi5.800 5 channel 1 soundstream rubicon rubi2.600 2 channel 1 soundstream rubicon rubi800.1 mono class d 1/0 knu 6 farad soundtream cap soundstream bx 10 soundstream 3 way xover Link to comment Share on other sites More sharing options...
dirtracer27x Posted April 27, 2011 Author Report Share Posted April 27, 2011 ok so here are a few pics,i glassed up the inside this morning with about 3 packs of fiberglass matte from wally world(about 24sqft or 2.66 yds).i have to say that if i do this again(and i probably will,i have 3 friends that want them built already)i will build so the back is removable for easier glassing.was a pain in the arse but i got er done .i went thru about a half gallon of marine epoxy i had left over from my old malibu rotten floor job .next i started with the body filler,tommorow i will sand i do a second pass of filler.still up in the air if i am going to paint or just carpet it.was doing this on a budget and i know paint will cost more,i have everything but no black layin around so i would have to buy some,as well as some high build primer.not to mention all the prep work for the paint,so carpet might be what comes next,lol,and i am a flooring contractor so this would be rather easy .well see tommorow i guess how i feel alpine 794 h/u 6 crescendo ccx 6.5 comps 4 polk db 6x9 3 ways 2 jl audio OG 12w6 v1 1 jl audio OG 10w6 v1 1 soundstream rubicon rubi5.800 5 channel 1 soundstream rubicon rubi2.600 2 channel 1 soundstream rubicon rubi800.1 mono class d 1/0 knu 6 farad soundtream cap soundstream bx 10 soundstream 3 way xover Link to comment Share on other sites More sharing options...
Recommended Posts