white4d96 Posted June 6, 2011 Report Share Posted June 6, 2011 So I got my 800.4 back from repair, but now when I have a driver plugged into amp 2, that driver moves slowly and randomly, like subsonic tones are playing. Unplugged the RCA's, nothing happens. Turned gains up, nothing. Turned gains down, nope. Bass boost is off, LPF set around 60hz. Only thing that ends it is unplugging the speaker. Different speaker, same problem. Car on, car off, same thing. What else should I check? I have emailed Kicker already but being its the weekend no response yet. Too many projects, too little time... Link to comment Share on other sites More sharing options...
dkindle613 Posted June 6, 2011 Report Share Posted June 6, 2011 maybe try checking your grounds. or making sure power wire and RCAs are not by each other.. WARNING: I speak 4 languages, profanity, English, sarcasm & real shit 2003 ford explorer 2 RF T1 D4 15s in a 6.8 cubic ft box 1 T1500.1bdcp 250amp ALT by Mike Singer 2 runs of 0 gauge 3 yellow tops Link to comment Share on other sites More sharing options...
white4d96 Posted June 6, 2011 Author Report Share Posted June 6, 2011 Power and RCA are separated. Power and ground to the amp are a little smaller than manufacturer recommended but IIRC it is oversize wire (some old streetwires 4-gauge, says something about Esoteric Audio on the casing, Kicker recommends 2-gauge.) Too many projects, too little time... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.