t-money Posted April 16, 2012 Report Share Posted April 16, 2012 DC Lv4 XL, T3 TSNS, AA Mayhem, AA SMD, DD9500, Fi BTL, DC Lv 5, and some more that I know I'm forgetting. And damn, that's a large increase in power. I would like to see clamp results. Also, nice build so far. I think I sounded a bit of an asshole in my previous post. Sorry bout that no worries , i get that kind of messages pretty often, (dump dat shit and buy this or that, coz i know and you know nothing -type of messages daily >_> ). however everytime i do build logs there is something i'm missing and every post is important. we do have DC audio importer in europe, a lvl4 XL is roughly 550€ whitout shipping. i've already asked for pricing for lvl 5 shipped in finland, but haven't got any response. i took some time searching for AA / Fi importer, and gladly found one! in europe tho. http://www.bladeice.com/products.php does AA / Fi http://www.directice.co.uk/ does DC audio nice! haven't found any T3 Distributor in europe, but alot to do before the sub. time will tell what will be my choise, one to keep in mind is that one old manufacturer has started to make new subs for Bassheads, finnish "autostudio". i've heard that the new series is build from quality components, such 3" voicecoil and kevlar cone. basket looks alot like SPL dynamic's baskets, so i gotta check that one also, it is rated at 1500w, but if it is what i've heard it will take much more than 1500w. autostudio reference unlimited 15D1 1500wrms 5000w peak spl dynamics SPL 380 D1A 1500wrms 3000w peak looks like an AB or AQ brother 2002 ford focus hatch pioneer DEH-P8400bh infinity kappa 6.5 components front and rear XS Power D1200 Shuriken BT-100 audioque 120.4 2 15 inch audioque HDC3 D2 2 audioque 2200d big 3 mechman 220a alt with external regulator 479-418-3056 Link to comment Share on other sites More sharing options...
Mrop Posted April 16, 2012 Author Report Share Posted April 16, 2012 I got an 340A Iraggi alt for around 350 euros to Norway. So can´t see why it would cost 1000 euros to Finland. Is there an distributor in NW that imports iraggi alternators? there ain't one in finland. IF i buy $600 alternator from US, it will cost $600+(roughly $200) shipping. total $800, when buying from US we gotta pay TAX for over 50€ stuff. so that adds +23% and overall +7,5% (customs fee) that's total of $1060 (estimated) it is not exact as i dont have any intrests of paying over 500€ to an alternator. however. with 350 i could be interested in getting one from norway. but not now, gotta build the rest of the car first. we compete with only on battery power so i don't get much advantage with bigger alt. for now. looks like an AB or AQ brother yeah, older dynamics had also AQ/DD basket. that 18 on the picture, i bought it. it was alot of fun and took 2200w rms easily whitout any stress. now, it is sold as long as my amp and soon my battery. getting a pile of cash for next build www.peranurkka.net Link to comment Share on other sites More sharing options...
Hifonic Posted April 16, 2012 Report Share Posted April 16, 2012 I ordered it directly from Iraggi. Have you even checked pricing or are you just guessing? I did not pay 200$ shipping and 600$ for the alt. I also paid 25% TAX for the alt. Link to comment Share on other sites More sharing options...
Mrop Posted April 23, 2012 Author Report Share Posted April 23, 2012 latest picture. project is on halt, no cash no fun. www.peranurkka.net Link to comment Share on other sites More sharing options...
SnowDrifter Posted April 23, 2012 Report Share Posted April 23, 2012 What do you plan on doing with that? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Mrop Posted May 19, 2012 Author Report Share Posted May 19, 2012 cage a bear innit. "little" updates... finally gathered the cash for the plywood, also bought some voltage/kW meters on the dash: xieli voltage meter and Pihti-Vite kW/A -meter http://sata.pp.fi/Mr...t/14/runko6.jpg[/img] first set of plywood final pictures from the frame. roof passenger side floor full roof behind the driver http://sata.pp.fi/Mr...t/14/runko5.jpg[/img] behind that's my amp atm http://sata.pp.fi/Mr...t/14/runko7.jpg[/img] first cuts http://sata.pp.fi/Mr...t/14/runko8.jpg[/img] had to take the seat off so i can get the plywood inside the car http://sata.pp.fi/Mr...t/14/runko9.jpg[/img] interior http://sata.pp.fi/Mr.../14/runko10.jpg[/img] last pic from the roof http://sata.pp.fi/Mr.../14/runko11.jpg[/img] first screwed in http://sata.pp.fi/Mr.../14/runko12.jpg[/img] that was pretty damn tight fit lotsa urethane to make the roof as solid as possible http://sata.pp.fi/Mr.../14/runko13.jpg[/img] http://sata.pp.fi/Mr.../14/runko16.jpg[/img] view from the doors. good idea to make 2x 18mm plywood instead of one 30mm. now i can seal the edges. http://sata.pp.fi/Mr.../14/runko17.jpg[/img] im adding triangle-cutted wood pieces on the interior corners to add extra strength to the corners http://sata.pp.fi/Mr.../14/runko21.jpg[/img] leaving some space undet the box so i have access on the wiring under the seat. http://sata.pp.fi/Mr.../14/runko20.jpg[/img] urethane ) http://sata.pp.fi/Mr.../14/runko18.jpg[/img] floor intact http://sata.pp.fi/Mr.../14/runko19.jpg[/img] more floor http://sata.pp.fi/Mr.../14/runko22.jpg[/img] backpiece doesnt fit perfectly :/ http://sata.pp.fi/Mr.../14/runko23.jpg[/img] backside http://sata.pp.fi/Mr.../14/runko24.jpg[/img] i made two pieces on the sides so i can add a piece of wood from b-pilar straight onto the walls frontwall http://sata.pp.fi/Mr.../14/runko25.jpg[/img] you can open the door and close without it hitting to the glass, fits nicely. http://sata.pp.fi/Mr.../14/runko26.jpg[/img] on the divers sude also http://sata.pp.fi/Mr.../14/runko27.jpg[/img] like so that's as far as i am now. i build this solo and with VERY low budged, so bare with me. i can afford like $50 / month to this build so will be slow process, phew. i am a student and making my thesis at the same time in this summer so time/cash is limited x_x www.peranurkka.net Link to comment Share on other sites More sharing options...
Mrop Posted May 19, 2012 Author Report Share Posted May 19, 2012 why on earth SMD forum does not accept images inserted in img /img -tags? ill fix the pictures tomorrow, too tired to add every picture one at the time. www.peranurkka.net Link to comment Share on other sites More sharing options...
evo90 Posted January 4, 2014 Report Share Posted January 4, 2014 i wonder if this thread gets more interested in if i pop 150+ on windshield with that 1500D amp... it has been morelike a monolog sofar. stock alt, 60A.because nobody in Finland imports high output alternators, i've been asking for WEEKS for distributer or importer, but no. would cost roughly 1000€ to get one highoutput alternator from US. other change is to get alot of stock alts, but i'd rather update my old to a 100-150A minimum. I got an 340A Iraggi alt for around 350 euros to Norway. So can´t see why it would cost 1000 euros to Finland. Hi Hifonic, How much you pay for shipping to Norway? Thanks. My Build Logo http://www.stevemeadedesigns.com/board/topic/157575-volkswagen-passat-b5-2001/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.