g6ryder Posted June 15, 2011 Report Share Posted June 15, 2011 So ive spent the last 2 days reconing m RE MT motor with upgraded FI soft parts its a 12" this was my 1st recone and and i think i did pretty well for a 1st timer i got D1 coil and extra spider and int leads i didnt know what that was but it was an upgrade so i paid the xtra 15$ lol but here are the pics Here is just motor thing is huge weighs i beleive 60+lbs by itself Just on boxing the recone kit The leads The motor and basket Got the spider glued down Got surround glued down Got dust cap glued down Got some weight on the dust cap while its drying I got D1 coil and both coils are sitting at .7-.9 ohm each so thats about right soldering these leads were a bisshhh Quote www.wooferwarehouse.com Link to comment Share on other sites More sharing options...
fox_racin4 Posted June 15, 2011 Report Share Posted June 15, 2011 Nice! How easy was it? not as hard as it seems? i acctually enjoyd doing mine! Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
Kevin Posted June 15, 2011 Report Share Posted June 15, 2011 Nice job! Quote Link to comment Share on other sites More sharing options...
BJD3 Posted June 15, 2011 Report Share Posted June 15, 2011 Dude, IDK. You guys make this look hella easy, but recones can't be as easy as they look...right? Quote Anti Peel and Seal...lol You may be offended by the above. Don't take it personally, I'm just abrasive. 2002 Buick Park Avenue DC Level 4 M2 12 D2 Car Audio Bargain 1600.1 Eclipse CD3200 ~2 cubes @ 34 hz. Stinger Roadkill Expert Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted June 15, 2011 Report Share Posted June 15, 2011 I'll be doing my first recone here soon too, it doesn't look that bad I heard the worst part is getting all the tinsels through the terminals, is that true? Looks like you did a good job though! Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
g6ryder Posted June 15, 2011 Author Report Share Posted June 15, 2011 Nice! How easy was it? not as hard as it seems? i acctually enjoyd doing mine! Very easy imo other then the tensil leads those were a bitch!!! and man it was fun i like it!! Quote www.wooferwarehouse.com Link to comment Share on other sites More sharing options...
g6ryder Posted June 15, 2011 Author Report Share Posted June 15, 2011 Nice job! Thanks man appreciate it!! Quote www.wooferwarehouse.com Link to comment Share on other sites More sharing options...
g6ryder Posted June 15, 2011 Author Report Share Posted June 15, 2011 I'll be doing my first recone here soon too, it doesn't look that bad I heard the worst part is getting all the tinsels through the terminals, is that true? Looks like you did a good job though! very easy process the actual labor doesnt take long at all its the drying that takes the most time but yes soldering the tensil leads were by far the most time consuming and difficult part Quote www.wooferwarehouse.com Link to comment Share on other sites More sharing options...
g6ryder Posted June 15, 2011 Author Report Share Posted June 15, 2011 Dude, IDK. You guys make this look hella easy, but recones can't be as easy as they look...right? imo wrong i thought it would be difficult not at all simple as placing glue and getting everything lined up and then appling pressure the leads were a little hard but ull get em just let it dry like it should before playing it!! Quote www.wooferwarehouse.com Link to comment Share on other sites More sharing options...
Basshead15 Posted June 15, 2011 Report Share Posted June 15, 2011 That sub looks like a beast. You should put up a video of it playing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.