Need Help Wit Port How To Make It Bigger And Will It Change My Tuning

[cartunez2004]

well my box is 9.0 cubic u got any ideas or pics of some kingsuv said to keep the port the same height and just extend it the length of the box to make one how does that sound and 12-16 is that 12 to 16''

[cartunez2004]

ok so im not gonna do a wall everyone is telling me to make a bigger port so im gonna but how to i go about that and what size and all im gonna built the box the same size as the one in there how should i do the port and where ?? kingsuv said just connect the ports that are there now and make one big one??? could someone give me some info on where to start or some pics thanks

[cartunez2004]

anyone have some ideas

[kingsuv]

heres a pic

Ok so it looks like the port is what 4-5 inches tall?

cut a straight line along the top of the port to meet with the top of the other port.

Then take a piece of wood and put it into the port at the top so it goes in just like the 2 ports did before you cut them out.

try to make the port depth as long as you can, keep it away from the back wall at least 4-5 inches.

Check how it sounds, if it's good keep it if not cut an inch off or so and try it again.

If all of this sounds too complex then look into going to a real shop, NOT SOME BUDDY, and they can help you out.

Please do not jump into doing a wall. It takes a lot of building experience to get them done right.

[cartunez2004]

yea im not doing a wall thats rules out. and i dont like the shops around my house. my brother in law would do it but im trying to do shit on my own so i can learn i know a good amount about car audio but never delt wit building boxes

[cartunez2004]

[cartunez2004]

[cartunez2004]

com on all u pros that build boxes every a little help please

[cartunez2004]

does anyone have any ideas on this box

[cartunez2004]

anyone have an idea if i change the port the way kingsuv said to will it change my tuning alot