bcpballer64 Posted July 12, 2011 Report Posted July 12, 2011 Ok so I have an RF prime 250 and I do not need it anymore. Well I was going to trade eclipsechris some stuff for it but he wants to use it for a full range speaker. How do I bypass the Lpf? I am sure it can be done I am just at a loss for how to do it. If it matters to anyone it is a Butterworth filter with a B203 variable resistor to set the cut-off frequency. I just want to bypass it or set it to 20k hz. And yes i know it will void warranty yadda yadda. "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
gally Posted July 12, 2011 Report Posted July 12, 2011 yo dont...you just turn the lpfilter to 0 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X
bcpballer64 Posted July 12, 2011 Author Report Posted July 12, 2011 Not an option, its always on and ranges from 40hz to 130hz. I can solder and desolder but i think if i just pull the variable resistor out the signal won't go through and then the amp would be useless. "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
bcpballer64 Posted July 12, 2011 Author Report Posted July 12, 2011 bump please help me figure this out guys. "The strongest reason for people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -- (Thomas Jefferson)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.