How do I wire 2 3ohm scv w7's?

[bignickk]

yea u can only go 1.5 or 6 ohms. and yea the zx series amps are only 2 ohm stable. you could get a jl amp. made for there subs. its rated at 1.5 ohms. or just get a 1 ohm amp and run it at 1.5

[MrSkippyJ]

6 ohms

if its at 6 ohms, my amp will run fine? will it still put out the full 750 watts?

Safe, yes. 750 watts, no.

[Louisiana Bass]

I think 1.5 would be fine, just like everyone else is saying. Try it and see

[vettedude102]

6 ohms

if its at 6 ohms, my amp will run fine? will it still put out the full 750 watts?

I don't think it will be

[bignickk]

fail on me lol

Edited July 18, 2011 by bignickk

[MarcoCaparrotta]

I say try 1.5... it should be fine

thanks a lot for the help guys, but one last question. if I ran them both off of their own amp, 3ohms, would it work? still on my kicker zx750. 750watts at 2 homs.

[08tahoe]

If you don't wanna try them in parallel then You'd probably see the most out of the sub and amp by just running one sub to that amp

[vettedude102]

Yeah it would work. But it probably wont be 750 watts

[vettedude102]

If you don't wanna try them in parallel then You'd probably see the most out of the sub and amp by just running one sub to that amp

This is true. It would be good to get another amp like you have. Then run them on each.

[MarcoCaparrotta]

Thank you so much for the help everyone! Im gonna try this tomorrow and Ill be sure to post back with some results. thanks again!