JBLEEZE33 Posted August 16, 2011 Report Posted August 16, 2011 If i have 2 sets of componets the are 100 watts rms each at 4ohms and im running them off 2chs that only rms 75w at 12.6 but 100w at 14.6 at 4ohm.. if i bridge them at 2ohms so i can get alot more out of the speakers will it kill them since they r 4ohm speakers.. if not then whats the best way to wire them.. thanks and please help Quote pioneer avic-n3 w ipod adapter clarion eq infinity kappa perfect 6.1 infinity kappa perfect 5.25 infinity kappa 6x9's 2 boston spg555's Boston acoustics gt-42 Boston acoustics gt-28 Boston acoustics gt-28 Big 3 Knu 0 gauge Optima battery
blownengine Posted August 16, 2011 Report Posted August 16, 2011 Uh what. Im not seeing the problem. If your amp does 100 watts at 4 ohms and your speakers are 4 ohms and handle 100 watts then just hook up one set per channel. Or did i miss something? Are the speakers 100 watts for 1 or for a pair? Quote 2003 Dodge Ram 1500 SLT (Yea its got a Hemi)Alpine CDA-105KnuKonceptz 0ga CCA Big 3 with Yellow Top 15" SoundQubed HDC3DC Audio 1.2K (Bass)Pioneer 6x9's (Front)Pioneer 6.5's (Rear)Kicker 3.5's (Dash)Sony amp on the highs. (Hey it was free)
JBLEEZE33 Posted August 16, 2011 Author Report Posted August 16, 2011 it does do 100w rms at 14.6v but im not running 14+v.. so the amp only does 75w rms at 12.6.. i want the speakers louder so i want to wire them different to get the extra power at 12.6v that you get if they were on a 2ohm load if that makes sense.. its a 4ch and the 2 rear ch are running 2 ohm 6x9's and i have 2 sets(4 speakers) of componets on the front 2 ch so i dont want to under power them so much.. im a noob so any advice will b appreciated Quote pioneer avic-n3 w ipod adapter clarion eq infinity kappa perfect 6.1 infinity kappa perfect 5.25 infinity kappa 6x9's 2 boston spg555's Boston acoustics gt-42 Boston acoustics gt-28 Boston acoustics gt-28 Big 3 Knu 0 gauge Optima battery
Never Satisfied Posted August 16, 2011 Report Posted August 16, 2011 i have mine wired @2 ohm... the speaker dont know just the amp... Quote If you are ever satisfied, sounds like you gave up... Never Satisfied ~Team Ns~
Rockbrook Posted August 16, 2011 Report Posted August 16, 2011 your speakers should be fine if you wire them down to 2 Ohms. just make sure your gains arent set too high of course... Quote
JBLEEZE33 Posted August 16, 2011 Author Report Posted August 16, 2011 i have mine wired @2 ohm... the speaker dont know just the amp... ok cool so what the exact way to wire them at the amp to make sure im running them in a 2ohm load.. thx Quote pioneer avic-n3 w ipod adapter clarion eq infinity kappa perfect 6.1 infinity kappa perfect 5.25 infinity kappa 6x9's 2 boston spg555's Boston acoustics gt-42 Boston acoustics gt-28 Boston acoustics gt-28 Big 3 Knu 0 gauge Optima battery
graham0599 Posted August 16, 2011 Report Posted August 16, 2011 Just parallel the speaker in each door and it wont hurt them. At least if im catching what youre saying right. Quote My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678
Never Satisfied Posted August 16, 2011 Report Posted August 16, 2011 Just parallel the speaker in each door and it wont hurt them. At least if im catching what youre saying right. thats it i only have one cross over in each door for now never got to put the others in.... Quote If you are ever satisfied, sounds like you gave up... Never Satisfied ~Team Ns~
Guest Posted August 16, 2011 Report Posted August 16, 2011 draw a wiring diagram of your speakers. your explanation is really confusing Quote
graham0599 Posted August 16, 2011 Report Posted August 16, 2011 draw a wiring diagram of your speakers. your explanation is really confusing Agreed ^ Quote My 350z build- http://www.stevemeadedesigns.com/board/topic/174424-2008-350z-build/page-2?hl=%2B350z+%2Bbuild#entry2605678
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.