CJ18 Posted October 13, 2011 Author Report Share Posted October 13, 2011 Not bad for some Level 3s and Clamped 8600w. This is sealed on the dash DB Drag style. Link to comment Share on other sites More sharing options...
CJ18 Posted October 13, 2011 Author Report Share Posted October 13, 2011 Video proof. Link to comment Share on other sites More sharing options...
CJ18 Posted October 13, 2011 Author Report Share Posted October 13, 2011 Please Leave comments here: http://www.stevemeadedesigns.com/board/topic/118463-cjs-06-f150-6-15s-and-20kw-1012-new-tl-and-pics-pg-19/#entry1665267 Link to comment Share on other sites More sharing options...
CJ18 Posted October 14, 2011 Author Report Share Posted October 14, 2011 Did a swap test and dropped in the 12k today. Link to comment Share on other sites More sharing options...
CJ18 Posted October 14, 2011 Author Report Share Posted October 14, 2011 7.5k nudie. I forgot to take a pic before I started cutting but this is the first step of building my driver side door pod. Next step tomorrow will be to trim it down flat once it is dried and then put a layer of fiberglass over it to seal everything up nice and solid. Once that dries I will use bondo to give me a nice flat surface to work with to build the pods base. Link to comment Share on other sites More sharing options...
CJ18 Posted October 14, 2011 Author Report Share Posted October 14, 2011 Gain setting the 7.5k with the DD1 and Scope. Link to comment Share on other sites More sharing options...
CJ18 Posted October 14, 2011 Author Report Share Posted October 14, 2011 Todays project: Driver door pod prep and trim panels. Trim Panel Template I have something special planned for these, but am waiting for some parts from toolmaker. Hmm what could be in the boxes??? I figured why buy CF Dustcaps when I can try and make them first! If this works then I will be having some larger molds made and try making 8" and 10" dustcaps. Link to comment Share on other sites More sharing options...
CJ18 Posted October 14, 2011 Author Report Share Posted October 14, 2011 Please post comments here http://www.stevemeadedesigns.com/board/topic/118463-cjs-06-f150-6-15s-and-20kw-comment-page/ Link to comment Share on other sites More sharing options...
CJ18 Posted October 15, 2011 Author Report Share Posted October 15, 2011 I had some blue CF vinyl left over from an old build that I figured I would try on the trim pieces between the subs. Its not bad but I think I am going to pull them and wrap them in black. Before After Also put the final coat of body filler on the driver side door panel. I can now sand this down flat and it is ready to make the back panel for the door pods. Link to comment Share on other sites More sharing options...
CJ18 Posted October 15, 2011 Author Report Share Posted October 15, 2011 Driver door panel base started I took blue painters tape and covered the door panel so I will be able to pop the pod off once it dries. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.