BTL N2 18 box design

[412 CVX]

box looks ok, but Im hating the port..

the port should be the width of the entire box (and not as tall), using 3 common wall

Or it should be made the entire height of the box and use 2 common walls

Putting the port right in the middle causes lots of dead air space and usually hurts numbers.

thanks for the input. i'll keep that in mind next time. only reason i did it is because i swear i've seen meade do it before in one of his projects

[412 CVX]

okay turned out better than i thought! i had to double check myself because the numbers looked too perfect, but i guess take what you can get.

worked out to use most of 3 sheets.

[4] 38x32 (red)

[2] 27.75x32 (green)

[2] 27.75x38 (light blue)

[1] 25.5x19 (dark blue)

[1] 25.5x2 (yellow)

[2] 10.75x27.75 with a 19.75x2 rectangle cut out of one corner(this is the L shaped piece) (pink)

[4] 1.5 inch diameter dowels

Edited October 22, 2011 by 412 CVX

[CHEVY4X4BLAZER]

I would split up the red panels due to blade thickness.

[412 CVX]

I would split up the red panels due to blade thickness.

was thinking the same thing, so maybe 4 sheets just to be safe.