Dshelton1993 Posted October 22, 2011 Report Posted October 22, 2011 ok I have 3 Hifonics 12's 300 watts rms at 4 ohms each. I need to know what amp to get, kinda new at this so I need some advice thanks.
JZeFF Posted October 22, 2011 Report Posted October 22, 2011 I'm assuming they are single voice coil subs? Edit: What I meant is each sub only has 1 set of power terminals, right? Pioneer x930 bt Rockford t2500 bdcp 18" nightshade v1 DC audio 175.4 RF power T162s up front, infinity 3 way 6x9's in the back (removing rear stage and re-doing doors soon) 3x XS power D2700's Knukonceptz 0awg all around
photochrisb931 Posted October 22, 2011 Report Posted October 22, 2011 What model number Hifonics subs are they? Are they dual or single 4's? What is your budget on an amp? Your final impedance on three single is 1.33 ohms parallel and 2.67 series parallel if they are duals. Barstad
Dshelton1993 Posted October 22, 2011 Author Report Posted October 22, 2011 http://www.hifonics.com/Hifonics_HF_Subwoofers.html
Dshelton1993 Posted October 22, 2011 Author Report Posted October 22, 2011 that's the subs not sure about all the details but I just need to know what watt amp I need to get to run all 3 at a good power
extremeauto Posted October 22, 2011 Report Posted October 22, 2011 i would look for a hifonics Brutus series amp like 1000rms range it should be just right for those subes daily make sure to get a 2nd batt as well 1995 Honda passport 3.2 4x4 Frankenstein on a budget ballistics sound deader (roof only so far) kenwood mp3 usb audio control 3 (upgrading) hifonics mx-3 3 sets of massive px5 5.25s 3 sets of massive tweets phonix gold 5.25 componets x2 massive nx4 nano 200x4 mids sony xplod 600x4 watt high's 2 Fi bl fully loaded box walled @31ish hz 13.2 cube box/wall massive DB8000 Excessive amaperge 250 amp alt wir extrnl regulator daul runs of xs power xpflex 0 gauge big 3 raptor 0 gauge power/ground wire full run suriken 45 amp hour x3 shriken bt-120 batts,interstate 1100CA semi batt scytek galaxy 2way alarm still upgradeing!
armykyle1 Posted October 22, 2011 Report Posted October 22, 2011 Personally I would get an amp you can run at .66-.7 that'll do 1k rms TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting
Recommended Posts
Archived
This topic is now archived and is closed to further replies.