Audio-Concepts Posted October 26, 2011 Report Share Posted October 26, 2011 Well everyone I had gotten lucky enough for a UBL, and will go ahead and start uploading pics and descriptions as the work progresses! First off start with the list of present equipment because some changes have been made since the start of the build like most! If you would like to leave comments, constructive critism, or feedback, you can do so through my original build log! http://www.stevemeadedesigns.com/board/topic/97601-sable-20-put-on-hold/ Car- 1998 Mercury Sable LS Head-unit- Alpine CDA-9886 RCA's- Knu Konceptz Front Stage- KEF KAR 160q 6.5" Front Stage tweeters- Blues Audio BDT-25 Sub Stage- modded Onyx LSM 12" Sub Amp- Tru Technology H1 "Hammer" Front Stage Amp- Linear Power 302 "modded" (tweeters) Front Stage Amp- Linear Power 1002 "modded" (doors) CAR: The car has been debadged, removed factory pinstripe, and tinted the taillights the right way! Used tinted clear-coat! 9 coats to get the darkness and depth I wanted, plus can see them perfectly at night or during the day! A few local cops have told me that they are the darkest but most visable! And you can see they look great on the car! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 26, 2011 Author Report Share Posted October 26, 2011 Next on the agenda came the radio housing. As in most ford cars, you have that huge, costly mounting kit. Well for my car, they dont make one as I have a digital climate control instead of the analog. Well this little difference posed a problem as to where I can mount my radio. I didnt want to completely destroy the factory radio as I will most likely trade this car in in the future, so I went decided, since I dont use the ashtray too much, thats a perfect spot. I started by making a mold of the face of the ashtray. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 26, 2011 Author Report Share Posted October 26, 2011 The housing is only about 90%, it will be painted denim blue to match the interior, and smoothed better! It was a 2 day job, during a blizzard, to give me something to do! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 Next up came the decision for my 6.5" KEF's. As most know the factory speakers in this car are 5x7" in the front doors. Well I dont like basic, I like character and custom! So I made the decision to build pods for my door panels, but I didnt want to build on the factory doors so I came up with this. Next came new tools for rings! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 Now came the rings for the speakers! I wanted flush mounted rings with a beauty ring to cover the screws for the speakers! Mind you these are my first attempt with a plunge router, and yeah I am hooked! Next up the long process of fiberglassing and bondo magic! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 After the bases have been trimmed, the mounting of the rings and wrapping of fleece take place, then the matting and resin stage! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 Now comes the time consuming tedious task of fun with bondo! Drivers side!!! Test fit with speaker and ring bolted to door! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 Now on to the passenger side! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 Now on to painting and installation! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted October 28, 2011 Author Report Share Posted October 28, 2011 Now for paint! Installation! The pods were painted in basic 2-part trim paint! The color is a denim blue! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.