Spl Menace Posted October 27, 2011 Report Share Posted October 27, 2011 Hello to all from the great north. He my build which started as ss 1-2 then over to 3-4. Any questions let me know. 4 fi Btls 2 american bass 500.1 Built with single sheets of 3/4 and 2x6 and 2x4. lots of PL. Up to here was all for ss-1-2 Lasted a year got bored. Quote 2009 SS 1-2 Canadian champ - 154.80 2010 SS 1-2 156.41 @ 62hz 2011 SS 3-4 156.5 @ 37hz Current Canadian East Champ. Check out my vids 4 FI BTL SPL Dual Stack .7D 2 american bass 500.1 Link to comment Share on other sites More sharing options...
AA98hoe Posted October 27, 2011 Report Share Posted October 27, 2011 Numbers? And what do you hope to gain going to ss 3-4 Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
Spl Menace Posted October 27, 2011 Author Report Share Posted October 27, 2011 Round2. Back of the was not too strong so rebuilt it with my buddy. Quote 2009 SS 1-2 Canadian champ - 154.80 2010 SS 1-2 156.41 @ 62hz 2011 SS 3-4 156.5 @ 37hz Current Canadian East Champ. Check out my vids 4 FI BTL SPL Dual Stack .7D 2 american bass 500.1 Link to comment Share on other sites More sharing options...
Spl Menace Posted October 27, 2011 Author Report Share Posted October 27, 2011 Round 3. Started to strengthen the rest of the box. added another layer of 3/4 to top bottom and sides. Back was ok being at 5" thick. sucks has not having any space. 33.5 x 25" port .. sexy lows. inexpensive bracing which works. never glued it down the baffles. tuck taped them just for fitting in case i wanted to cut the port down a little or make other changes inside. Quote 2009 SS 1-2 Canadian champ - 154.80 2010 SS 1-2 156.41 @ 62hz 2011 SS 3-4 156.5 @ 37hz Current Canadian East Champ. Check out my vids 4 FI BTL SPL Dual Stack .7D 2 american bass 500.1 Link to comment Share on other sites More sharing options...
Spl Menace Posted October 27, 2011 Author Report Share Posted October 27, 2011 At first my port was 33.5 x 25" and 10" wide. was hitting 154 @ 29hz. It was fun but didnt hit the notes i liked. I have now cut down the port to 15'long and now sitting at 37hz @ 156.5. I will have lots of work to get this baby ready. Last power test i was sitting at a starting rise of .3 up to 1.1 and 7300rms of power clamped. Currently working on getting batts and new alt. Not charging above 13.4 not good. Most important thing i forgot. The box is 34.6cubes and 95% square. Hope you guys like it. im on the left. Quote 2009 SS 1-2 Canadian champ - 154.80 2010 SS 1-2 156.41 @ 62hz 2011 SS 3-4 156.5 @ 37hz Current Canadian East Champ. Check out my vids 4 FI BTL SPL Dual Stack .7D 2 american bass 500.1 Link to comment Share on other sites More sharing options...
TheBetterMethod Posted October 27, 2011 Report Share Posted October 27, 2011 Cool build, and a nice score indeed. Well done sir! Quote 2005 Subaru Outback Wagon Pioneer 9400BH Fi Q 15, SAZ1500dV3 The first build>>> http://www.stevemead...-outback-build/ 140.9 @ 36hz Sealed on dash! REBUILT!!! 2 Fi Q 15s, 2 SAZ1500dv3 146.9 @ 39hz dBDRA certified Link to comment Share on other sites More sharing options...
AA98hoe Posted October 27, 2011 Report Share Posted October 27, 2011 Nice score if your going for straight spl id tune higher add more power and mod inside of box for better airflow. If you want to groundpound leave it Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
Spl Menace Posted October 27, 2011 Author Report Share Posted October 27, 2011 Nice score if your going for straight spl id tune higher add more power and mod inside of box for better airflow. If you want to groundpound leave it for now im gonna leave it and do a few mods inside. this is a daily ride. Goals a 158 daily. Quote 2009 SS 1-2 Canadian champ - 154.80 2010 SS 1-2 156.41 @ 62hz 2011 SS 3-4 156.5 @ 37hz Current Canadian East Champ. Check out my vids 4 FI BTL SPL Dual Stack .7D 2 american bass 500.1 Link to comment Share on other sites More sharing options...
fecupe2001 Posted October 27, 2011 Report Share Posted October 27, 2011 Very nice build dude, i´ve seen all of your builds actually, i was considering building a flat wall just like that in my EX, but, i DD´s doesn´t like "small" ports at all, you managed to get around 335SQ of port with the flat wall, honestly speaking, that doesn´t work for my 3518´s (unless i´m doing something wrong haha) , that´s why i´m going with a 6th order in the future i guess, what´s the shell dimensions ?if you don´t mind me asking Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
Spl Menace Posted October 27, 2011 Author Report Share Posted October 27, 2011 Very nice build dude, i´ve seen all of your builds actually, i was considering building a flat wall just like that in my EX, but, i DD´s doesn´t like "small" ports at all, you managed to get around 335SQ of port with the flat wall, honestly speaking, that doesn´t work for my 3518´s (unless i´m doing something wrong haha) , that´s why i´m going with a 6th order in the future i guess, what´s the shell dimensions ?if you don´t mind me asking not too sure my box sits between the wheel wells. indside is 42.5x33.5x45 Quote 2009 SS 1-2 Canadian champ - 154.80 2010 SS 1-2 156.41 @ 62hz 2011 SS 3-4 156.5 @ 37hz Current Canadian East Champ. Check out my vids 4 FI BTL SPL Dual Stack .7D 2 american bass 500.1 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.