Jesseland Posted October 28, 2011 Report Posted October 28, 2011 (edited) 2nd Battery in, amp (Kicker ZX1000.1) mounted up top: Bare box 3.6cf @ 34hz. Primed: At this point i wish i would have 45'd the top face plate: Sub in, with direct connect leads: Where it will be chained thru (on both sides): Inside was fiberglass'd also: All In: Box is only 3.6cf (3.4 after displacement of sub) Wish i could have made it bigger but it still sounds clean and i like it alot. Lemme know what you guys think Edited October 28, 2011 by Jesseland Quote Amp: Kicker ZX1000.1 Sub: 1 AudioQue HDC315 Box: 3.6cf @ 34hz 2nd Batt: Shuriken BT-35
Guest Posted October 28, 2011 Report Posted October 28, 2011 seal off those 2 big openings between the sides of the box and the car and it'll be way louder Quote
Watch the bass Posted October 28, 2011 Report Posted October 28, 2011 Nice box, but where did you find the colour or is it a gift out of the old ages out of daddy´s garage? Quote "in the abundance of water, the fool is thirsty" Bob Marley
Guest grim83 Posted October 28, 2011 Report Posted October 28, 2011 seal off those 2 big openings between the sides of the box and the car and it'll be way louder what he said Quote
cjvue Posted October 28, 2011 Report Posted October 28, 2011 Why you didnt angle cut the top and bottom? Nonetheless, nice work! Quote My Build Log- T E A M S U N D O W N A U D I O - 2013 DbDrag WF SS1-2 - 5th Place 154.6db 2013 MECA Mod3 CA State Final Champ 153.4db Powered by: Sundown Audio
Jesseland Posted October 28, 2011 Author Report Posted October 28, 2011 seal off those 2 big openings between the sides of the box and the car and it'll be way louder I wanted to but i wasnt too sure how to go about it so i didnt bother. Why you didnt angle cut the top and bottom? Nonetheless, nice work! I was in a big rush to get the box done, i thought it would look fine as it was, apparently not haha. Quote Amp: Kicker ZX1000.1 Sub: 1 AudioQue HDC315 Box: 3.6cf @ 34hz 2nd Batt: Shuriken BT-35
Guest Posted October 28, 2011 Report Posted October 28, 2011 seal off those 2 big openings between the sides of the box and the car and it'll be way louder I wanted to but i wasnt too sure how to go about it so i didnt bother. you can use trim pieces of mdf, i've never done it before so im not 100% sure how to do it. Quote
cjvue Posted October 28, 2011 Report Posted October 28, 2011 Lol... Same here but i've learn to be patient and make it right the forst time. Unless its a test box Quote My Build Log- T E A M S U N D O W N A U D I O - 2013 DbDrag WF SS1-2 - 5th Place 154.6db 2013 MECA Mod3 CA State Final Champ 153.4db Powered by: Sundown Audio
Guest grim83 Posted October 28, 2011 Report Posted October 28, 2011 seal off those 2 big openings between the sides of the box and the car and it'll be way louder I wanted to but i wasnt too sure how to go about it so i didnt bother. make a beauty panel, easiest way is take a large piece of cardboard and get it to fit perfectly across to completely seal off the cabin from the trunk then transfer that to a piece of mdf and slide it in infront of the box attach it and your done Quote
cjvue Posted October 28, 2011 Report Posted October 28, 2011 seal off those 2 big openings between the sides of the box and the car and it'll be way louder I wanted to but i wasnt too sure how to go about it so i didnt bother. you can use trim pieces of mdf, i've never done it before so im not 100% sure how to do it. Cardboard cutout to test fitment and refine is your friend before cutting any mdf on that one Quote My Build Log- T E A M S U N D O W N A U D I O - 2013 DbDrag WF SS1-2 - 5th Place 154.6db 2013 MECA Mod3 CA State Final Champ 153.4db Powered by: Sundown Audio
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.