eltortuga94 Posted October 30, 2011 Report Share Posted October 30, 2011 (edited) How do I go about setting my gains with the DD-1 while using an EQ that has gains at 45Hz, 100Hz, 700Hz, 2kHz and 15kHz? I was thinking of creating tones in audacity & setting 100 - 2khz with a -5db tone & find the clipping point for each frequency & 15khz with a -10db tone since songs normally roll off around 10-12khz. Would this work? Or should I use a -5db tone all around? Edited October 30, 2011 by eltortuga94 Quote System: Basically Stock In process of upgrading Link to comment Share on other sites More sharing options...
Decaf Posted October 30, 2011 Report Share Posted October 30, 2011 the device only detects 40hz and 1000hz. those are the only frequencies you can test Quote Link to comment Share on other sites More sharing options...
NZBasshead Posted November 12, 2011 Report Share Posted November 12, 2011 the device only detects 40hz and 1000hz. those are the only frequencies you can test you have any idea how i would set the gains while the signal is coming from my eq? because my eq also has a bass output with a min to max and an over al volume for the sub+mids highs would i just set them half way sub output and volume then set the volume on my headunit then set the gains ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.