sundownz Posted November 3, 2011 Report Share Posted November 3, 2011 Original Discussion Thread I expect to have this in by first of February if not sooner (working on better ETA). Production on the steel parts started first of last month but I am being conservative with the ETA due to the continually increasing delays we have experienced this year on production. Due to popular demand I'll go ahead and open pre-ordering on these models. E-10 D2 / D4 - $89 EACH ($105 regular) E-12 D2 / D4 - $94 EACH ($110 regular) E-15 D2 / D4 - $110 EACH ($130 regular) Shipped in the continental 48 states. Hawaii and AK e-mail for quotes. !!! USA ONLY !!! You can PAYPAL us at [email protected] OR order from your favorite local or online retailer during this pre-order sale. I do expect the first production run to sell very quickly so if your heart is set on these go ahead and get them now. !!! FRAMES WILL BE BLACK ON PRODUCTION !!! ---------- Weights : 10 - 16.4 lbs 12 - 16.9 lbs 15 - 17.8 lbs Mounting Depths : 10 - 5.5" 12 - 6.25" 15 - 7.0" Add 5/16" for production due to the spacer I'm adding. All subs have 12mm one-way linear x-max by 70% BL method. ---------- Thermal test completed @ 60 Hz sine wave : TIME // CLAMPED WATTS At ~400 the heat wasn't building up any faster than it could be dealt with as demonstrated by the minimal drop in power over time once it hit operating temp. So I feel the 400 RMS rating is well deserved -- it could literally handle that "all day" so to speak. Then we hit it with more power after the typical 5 minute test as we normally do... it took over 2 minutes at 500-700 after that to kill it. Conclusion... thermal capacity is a non-issue on this design @ 400 RMS. Little inside view after we cut it up : ---------- Testing 400-watt E-15 prototype in free air. As per my comments in the video we'll have 8mm more rearward clearance on production (16mm p-p) so the driver will support even more throw before any mechanical tapping. ---------- E-10 : D2 Specs D4 Specs ---------- E-12 : D2 Specs D4 Specs ---------- E-15 : D2 Specs D4 Specs Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted November 23, 2011 Author Report Share Posted November 23, 2011 These should be finishing up early... which would put them in the first week or two of January !!! So get those pre-orders in while you can! Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted December 20, 2011 Author Report Share Posted December 20, 2011 Looking at these hitting the port in Savannah on the 9th of January -- I will be out of town upon their arrival but pre-orders should go out the week of the 16th as I'll be back on the 17th. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted January 4, 2012 Author Report Share Posted January 4, 2012 This pre-order will be over as soon as I get back from CES. I get back the 17th and back to work on the 18th... so you have until the 18th to get orders in @ this price. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
sundownz Posted January 19, 2012 Author Report Share Posted January 19, 2012 These are due on Friday -- preorder is over. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.