OrenB217 Posted December 23, 2011 Report Share Posted December 23, 2011 I am debating on whether to get 2 2500s strapped at 2 ohms or a 4500 at 1 ohm? The system is going to be 2 ns v2 15s in a 6.25 cube box @ 33 hz with 116 sq inches of port sealed off from the trunk firing forward. Electrical is 2 runs of 0 gauge, 2 xspower d3100 batteries and a excessive amperage 200 amp alternator. I want the most power output with the least impedance rise, Let me know if you have experience with testing these amazing amps Quote Black 1998 Nissan Maxima1st Setup: 145.8 DB Outlaw @37 HZ On Music Out Of Trunk2nd Setup: 147.8 DB @42 HZ On Music Out The TrunkCurrent Trunk Build:153.8 DB Outlaw @ 49 HZ Out the trunk (150.8 DB Sealed)Team gg. Link to comment Share on other sites More sharing options...
fritosaregood Posted December 23, 2011 Report Share Posted December 23, 2011 (edited) I would put my money on the 2500s, when I scope mine they give clean signal up to around 3200 watts at 14.4, but thats not clamped numbers. Edited December 23, 2011 by fritosaregood Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
AA98hoe Posted December 23, 2011 Report Share Posted December 23, 2011 Why not strapped at 1ohm? Id do 2500s Quote TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
OrenB217 Posted December 23, 2011 Author Report Share Posted December 23, 2011 Why not strapped at 1ohm? Id do 2500s wont that void warranty and damage amps? Im going to use this for daily use, plus competition Quote Black 1998 Nissan Maxima1st Setup: 145.8 DB Outlaw @37 HZ On Music Out Of Trunk2nd Setup: 147.8 DB @42 HZ On Music Out The TrunkCurrent Trunk Build:153.8 DB Outlaw @ 49 HZ Out the trunk (150.8 DB Sealed)Team gg. Link to comment Share on other sites More sharing options...
WhiteTB Posted December 23, 2011 Report Share Posted December 23, 2011 2 - SAZ 2500D Strapped clamped mine at Volts AC 119.3 x Amps AC 41.6= 4962.8 watts of clean power Quote Team DOA Team gg Link to comment Share on other sites More sharing options...
Watch the bass Posted December 23, 2011 Report Share Posted December 23, 2011 2 - SAZ 2500D Strapped clamped mine at Volts AC 119.3 x Amps AC 41.6= 4962.8 watts of clean power Saz 4500 D does 5.5 K-watt´s @ 1 Ohm, @ 13.5 Volts. Quote "in the abundance of water, the fool is thirsty" Bob Marley Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.