14dbass Posted December 26, 2011 Report Share Posted December 26, 2011 Ok, well I have been working on it a few days now.This is what I started with.This is the carStock battery setupThe small trunk has 2 of my batteries in it hereRear window I think I will put stickers hereMy box when it wus under constructionThe 2400'sEngine bayCenter consoleView of trunk from the front with seats downStock alternator Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
14dbass Posted December 26, 2011 Author Report Share Posted December 26, 2011 Now The work that has been done to it. Ok so first thing I did was removed the spare tire and the metal mounting spot for it with a plasma cutter then sealed it so it was smoother and would not rust. Then removed Battery and Removed all the interior trim... See next few pics Some are fuzzy Sorry :/ And removed rear seats Then built the battery rack and installed batterys it is not done yet but getting there. The box is finished 3.25ft net tuned to 35hz Got all the sound deadener in but lost some pics If will have video of it later. And that is where I am at now. Will be running all the wires and building floor in trunk soon. I have Alpine 6x9's and 6 1/2's on a 100X4 amp for the mids and highs pics and vids soon. I will be getting 2 DC Audio M2 Xl 12's and a 3.5k in early January. As well as a DC Power 270XP alternator Will be posting videos soon. Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
Miggz96 Posted January 2, 2012 Report Share Posted January 2, 2012 Liking the work so far bro, very thorough with the deadener. Im tuned in If I'm goin to hell, I'm going in a HOLDEN!!! Speed doesn't kill, Its the stopping suddenly that gets you. Quoted by the one and only Jeremy Clarkson. Build: A Secret! Link to comment Share on other sites More sharing options...
RCP Audio Posted January 2, 2012 Report Share Posted January 2, 2012 dang that deadner looks good man. Im keeping an eye out for this one for sure!! PSN: Rcp_soundz Good rule of thump is go by what fuse size is being used in these amps. The higher the more amperage it pulls, this is what I look at. I'll stick a 300 amp fuse in a potato and sell it to you for $2k. 1991 Mazda 323VERY small build thread here: http://www.stevemead...23-small-build/ Link to comment Share on other sites More sharing options...
14dbass Posted January 9, 2012 Author Report Share Posted January 9, 2012 Updates!!! So it has been along time sense I updated because of camera problems but fixed now and I have done a lot. Videos are being edited but I got slow pc so it will be a bit. Front 6 1/2's in the doors Rear 6x9's in back Before soldering ring terminals but I forgot to take pics of after lol so i will take some when I do the Big 3 Engine bay side through the firewall before I siliconed it all up. Wires going to firewall. Wires are in here for protection. Wires coming out of the carpet in the back. Batteries in spare tire spot with lots of wire. Floor top. Floor bottom Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
14dbass Posted January 9, 2012 Author Report Share Posted January 9, 2012 Fixed pics Screwed amp rack down to the back seats. Deck and meters in and trim back on. Fuse holder cover on Fuse holder cover off fuse in. Lots of 300 amp fuses. No trim on but meters and deck in Wires plugged in Wire mess before plugged in Back of car with no equipment Painted tops of screws so they match the carpet on amp rack. Got board and had extra paint so ya... Well I got to finish the big 3 then I will post the pics of that. Just waiting on my amp and subs from DC now. Much excited Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
14dbass Posted January 31, 2012 Author Report Share Posted January 31, 2012 Now vids from the build. (Probably should have put these up sooner...) Don't worry all the vids are about 1 min long so they are short. Part 1 Part 2 Part 3 Part 4 Part 5 Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
14dbass Posted January 31, 2012 Author Report Share Posted January 31, 2012 More Videos! These are all short aswell. Part 6 Part 7 Part 8 Part 9 Part 10 Well The subs and the amp came in today so I will post pics later tonight or tomorrow morning. I don't have them installed yet but soon. The amp is in though. Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
14dbass Posted January 31, 2012 Author Report Share Posted January 31, 2012 Pics Of the subs Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
14dbass Posted January 31, 2012 Author Report Share Posted January 31, 2012 Suburban Build Log "So much money and time spent making copper winding move up and down a magnetic pole" DC Audio Eclipse Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.