jeremiejohnson23 Posted December 31, 2011 Report Posted December 31, 2011 Im looking for any help on a ported box design for 4 12s in a 1992 caprice. Im trying to build it myself because its too expensive to get a shop to do it.(460). I was trying to get it tuned at 33 to 35 hertz. Sub displacement is .15cu ft. Measurements are 53w, 18h, 17.5d. Any help would be greatly appreciated. Quote
BEEF7613 Posted December 31, 2011 Report Posted December 31, 2011 Download Torres Box Tuning software. Easiest box tuning software out there. I design all my boxes on it and it gives you a full cut list. Quote
pwdrblucivic Posted December 31, 2011 Report Posted December 31, 2011 (edited) Where are you located? PM ME Edited December 31, 2011 by pwdrblucivic Quote
jeremiejohnson23 Posted January 1, 2012 Author Report Posted January 1, 2012 Im in louisiana. Baton rouge area Quote
I am Poncho Posted January 1, 2012 Report Posted January 1, 2012 easy as pie... Quote OLD BUILD LOG: http://www.stevemeadedesigns.com/board/topic/166273-poncho-designs-trailblazer/ New car, new build coming soon...
jeremiejohnson23 Posted January 2, 2012 Author Report Posted January 2, 2012 Help me out then poncho. Lol. Um not good at figuring out ports and all that. Really wish i can just get a cut out sheet. I need to know wich way the subs and ports should face and all that. Any help is appreciated. This is a real struggle for me. I never did my own custom box Quote
jeremiejohnson23 Posted January 2, 2012 Author Report Posted January 2, 2012 Im sorry. I c it. But i dont fully the ports. Is it l ports or straight ports. Um kinda lost Quote
Bump4life Posted January 2, 2012 Report Posted January 2, 2012 do you have all tools required to make box? and do you have knowledge to build a box out of wood? then you can make a custom box. it takes a few to get good at them. well build time wise at least. but port lentgh is only tricky par when figuring out cuts. measure down center of port Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick
jeremiejohnson23 Posted January 2, 2012 Author Report Posted January 2, 2012 Yes i have the tools and yes i do have some knowledge on box building. I am completly lost on the port. Poncho put my measurements in the torres box tuning sofware and sent it to me but i still don understand the ports. I don kno if its one big port or dual ports. So yea i am a bit confused Quote
Bump4life Posted January 2, 2012 Report Posted January 2, 2012 it is one port with 3 of the walls being edges of the box. Quote Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.