ShAdOwSpEcTrUm7 Posted January 1, 2012 Author Report Posted January 1, 2012 Hmm, I purchased the subs from Sonic Electronix and they don't seem to carry the dual 4... I'm not sure what to do. At 2 ohms it really seems like the subs would be very underpowered. Quote
bassahaulic Posted January 1, 2012 Report Posted January 1, 2012 How is 14^3 to big for 2 18"s? O_o I think as long as gain is set right, and your easy on them at first and learn the limits. You'll be good. Quote
ShAdOwSpEcTrUm7 Posted January 1, 2012 Author Report Posted January 1, 2012 Alright, thanks. I think I may run them at 2 ohms for the first few weeks or so, and then switch to 0.5 and figure out what my limits are... If my equipment can't handle it I can always figure out something else. Quote
Socky Posted January 1, 2012 Report Posted January 1, 2012 Those subs will handle the power nicely at .5ohm, xxx's are underrated like all re subs. As long as you set the gain right and not clipping you should be fine running them at .5ohm. Quote Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
ShAdOwSpEcTrUm7 Posted January 1, 2012 Author Report Posted January 1, 2012 Okay, thank you. I really appreciate the help from you guys. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.