blownengine Posted January 12, 2012 Report Posted January 12, 2012 would you recommend flaring the inside? i'm guessing it would have the same effect as putting 45's in a slot port? Same idea. Whay do one side but not do the other? Quote 2003 Dodge Ram 1500 SLT (Yea its got a Hemi)Alpine CDA-105KnuKonceptz 0ga CCA Big 3 with Yellow Top 15" SoundQubed HDC3DC Audio 1.2K (Bass)Pioneer 6x9's (Front)Pioneer 6.5's (Rear)Kicker 3.5's (Dash)Sony amp on the highs. (Hey it was free)
mattc3366 Posted January 12, 2012 Report Posted January 12, 2012 I used a metal bowl and a heat gun. Just rotate the pipe while giving it a little pressure and when it gets to the amount of flare you want dump ice water down the pipe to sort of lock it and place. Wait a few mins for it to cool then lift it off the bowl. I only flared the inside of mine. I would have done the front but the bowl I used wouldn't have given me enough flare to mount it. Hope this helps! Quote subwoofers - two eclipse 88120s box - 3.4 cubes tuned to 32 hz amps - aq1200 and pheonix gold zx450 New build : 2 obsidian audio 15s same amp 6.1 cubic foot box tuned to 32 hz in a civic hatch
fecupe2001 Posted January 13, 2012 Report Posted January 13, 2012 (edited) Easiest and fastest way for me, they always end up looking very nice Edited January 13, 2012 by fecupe2001 Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.