HotRodHam Posted January 13, 2012 Report Share Posted January 13, 2012 how many cudes should each 12" HDC3 have gonna be powered by 1 AQ2200D in a ported box tuned to 32 Hz Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200 Link to comment Share on other sites More sharing options...
SilveradoGoesBang Posted January 13, 2012 Report Share Posted January 13, 2012 (edited) 1.75 min I'd go 2.25-2.50 with that power And that's per sub Edited January 13, 2012 by AltimaGoesBang Quote "SilveradoGoesBang" http://www.stevemeadedesigns.com/board/topic/155256-silveradogoesbang-box-done-take-notes-on-bracing/ 2 FI BTL 18's CT Sounds 7k 2013 MidwestSPL Finals Xtreme 3 - 1st Place Link to comment Share on other sites More sharing options...
getlocivic Posted January 13, 2012 Report Share Posted January 13, 2012 (edited) single aq1200 on 2 hdc3 12s.. lol 2.5 cubes net each tuned to 32 to 38hz and about 15 to 16inches of port per cubic foot those aqs will laugh at a 2200d if you dont clip them and such Edited January 13, 2012 by getlocivic Quote Link to comment Share on other sites More sharing options...
HotRodHam Posted January 13, 2012 Author Report Share Posted January 13, 2012 single aq1200 on 2 hdc3 12s.. lol 2.5 cubes net each tuned to 32 to 38hz and about 15 to 16inches of port per cubic foot those aqs will laugh at a 2200d if you dont clip them and such first off hdc3s r 1000rms rated... y would i put a single 1200D on 2 of em second im buying a DD-1 here soon too so no clipping Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200 Link to comment Share on other sites More sharing options...
getlocivic Posted January 13, 2012 Report Share Posted January 13, 2012 ^^ my post says 2200.. and yea they are "rated" for 1k lolololo... ive personally seen a standard copper coil hdc3 take 2500watts for 20mins before it started getting warm Quote Link to comment Share on other sites More sharing options...
HotRodHam Posted January 13, 2012 Author Report Share Posted January 13, 2012 (edited) ^^ my post says 2200.. and yea they are "rated" for 1k lolololo... ive personally seen a standard copper coil hdc3 take 2500watts for 20mins before it started getting warm ill think about that when i have cash for the 3500d dude at comp had 4 18" HDC3s running off 2 AQ3500ds and they were loud and if obviously says AQ1200d single aq1200 on 2 hdc3 12s.. lol 2.5 cubes net each tuned to 32 to 38hz and about 15 to 16inches of port per cubic foot Edited January 13, 2012 by HotRodHam Quote 18" Sundown Zv4 D2JL 1000/1 V1XS Power D3200 Link to comment Share on other sites More sharing options...
getlocivic Posted January 13, 2012 Report Share Posted January 13, 2012 i editied the post as soon as i posted it.. like literally and yes aqs will take wayyy over rated power.. my buddy had 2 aq hdc3 12s on a sundown 4500d at 1/2ohm just killin em he beat on them daily they took the abuse (thermally) but eventually he ripped the spiders n shit Quote Link to comment Share on other sites More sharing options...
mlstrass Posted January 14, 2012 Report Share Posted January 14, 2012 1.75 min I'd go 2.25-2.50 with that power And that's per sub x2 and I'd tune a little higher then 32Hz unless you plan to just play stuff in the 20's. 35Hz tuning will play high 20's no problem... Quote Link to comment Share on other sites More sharing options...
michael_woodworth2000 Posted January 14, 2012 Report Share Posted January 14, 2012 6-8 total net cubes. I currently have 2 aq sdc2.5 15's in an 8 net cube box tuned to 29hz on an ap15001d tuned with a DD-1. Shit slams. Better to keep it on the large side than smaller with AQ's. Quote Pioneer AVIC F900BT double din Stinger digital volt meter on dash 1/0 guage power wire positive and negative Interstate 117ah battery in the back 2 runs 4 guage power wire from rear battery to amp Power Acoustics Stax 5500 4 Powerbass m-15's(old style) 2 sets o2 5.25 inch components in front 2 Sony 5x7 in back Sony 500 watt 4 channel Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.