Freshman6969 Posted February 12, 2012 Report Share Posted February 12, 2012 (edited) The gain is full (cause I'm not getting loud sound!) & ahh. I see. & I believe so it's either that or 180. What is phase anyways? if you were to flip the subs so the magnet was faceing out, and the cone facing in, then you would put it on 180, other wise its at 0, checking your wiring and make sure the phase is at 0, the wiring is the only thing i could see to keep it from being loud at this point and turn that gain down to 6 or 7 Edited February 12, 2012 by Freshman6969 Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
p.flint Posted February 12, 2012 Author Report Share Posted February 12, 2012 Gain is like sensitivity I think. Sound right? What could be my issue here anyways? At first, one sub wouldn't play, I opened the box, and I had forgotten to plug it in. Then, it still wouldn't play, and I had forgotten to plug in the - terminal. FAIL. Could I have damaged the amp? Quote Link to comment Share on other sites More sharing options...
Freshman6969 Posted February 12, 2012 Report Share Posted February 12, 2012 (edited) Gain is like sensitivity I think. Sound right? What could be my issue here anyways? At first, one sub wouldn't play, I opened the box, and I had forgotten to plug it in. Then, it still wouldn't play, and I had forgotten to plug in the - terminal. FAIL. Could I have damaged the amp? so no subs will play off the amp now? and no the gain is pretty much the "limiter" to let power flow though the amp....thats in simple terms Edited February 12, 2012 by Freshman6969 Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
97Jetta1637 Posted February 12, 2012 Report Share Posted February 12, 2012 The gain is full (cause I'm not getting loud sound!) & ahh. I see. & I believe so it's either that or 180. What is phase anyways? if you were to flip the subs so the magnet was faceing out, and the cone facing in, then you would put it on 180, other wise its at 0, checking your wiring and make sure the phase is at 0, the wiring is the only thing i could see to keep it from being loud at this point and turn that gain down to 6 or 7 try that Quote #teamihop Two 12 inch DC XL's Carbon Fiber Cap Stetsom 7k Shell of box / baffle built by me Port / sealing the box by John Hone Fuck midrange Alpine-9886 http://www.stevemeadedesigns.com/board/topic/177428-97jettas-sql-trunk-wall-loudest-99-buick-century-custom-with-a-one-legged-owner/ price has no influence on how something sounds I told him to move the fucking port. they see me hoppin they stoppin they can't believe im so white and dirty It looks like you got so drunk, that someone came up and stole your leg. Link to comment Share on other sites More sharing options...
p.flint Posted February 12, 2012 Author Report Share Posted February 12, 2012 If it were a gain/phase problem, then it wouldn't sound just fine solo. These subs aren't getting the 500 watts. Quote Link to comment Share on other sites More sharing options...
p.flint Posted February 12, 2012 Author Report Share Posted February 12, 2012 so no subs will play off the amp now? and no the gain is pretty much the "limiter" to let power flow though the amp....thats in simple terms No the subs play and all. Quote Link to comment Share on other sites More sharing options...
Freshman6969 Posted February 12, 2012 Report Share Posted February 12, 2012 recheck your wiring once, twice, and 3 times over, ive done it, and so has everyone else, its always something simple, that you dont notice, unless you sit there and stare at it Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
p.flint Posted February 12, 2012 Author Report Share Posted February 12, 2012 Believe me, I have. I'm stumped. That's why I'm here. & lol way more than 3 times for sure. Quote Link to comment Share on other sites More sharing options...
Lbox88 Posted February 12, 2012 Report Share Posted February 12, 2012 What area do you live in? Someone may be kind enough to give you hand in the daylight tomorrow or something. Quote UBL | Build Log Link to comment Share on other sites More sharing options...
Freshman6969 Posted February 12, 2012 Report Share Posted February 12, 2012 What area do you live in? Someone may be kind enough to give you hand in the daylight tomorrow or something. this is true, im stumped if its not your wiring, or your amp settings Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.