95blazer Posted March 3, 2012 Report Posted March 3, 2012 i have two rf p2 12s they are dual 2s and 250wat rms 500wat max. what would be the best way to go for a banpass box?
95blazer Posted March 3, 2012 Author Report Posted March 3, 2012 Recommended Enclosures Sealed - 1.02 cubic feet,Ported - 1.79 cubic feet - port diameter / length: 4 in x 10 in for my subs
Socky Posted March 3, 2012 Report Posted March 3, 2012 just do 2cuft sealed and 4cu ft ported tuned to 45 hz and your good to go Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
IanJohnson Posted March 4, 2012 Report Posted March 4, 2012 sockys got af pretty good idea, draw it up on google sketch up for a better picture Duel Sa-8 V.2 D2 Sub Enclosure 2001 Pontiac Grand am Head Unit - OEM Processor - RF 3sixty.2 Subs - RE Audio SXX12D4 Amplifier - Kicker ZX1000.1 Mids & Highs- Rockford Fosgate Power T2652-S Rockford Fosgate Power T1693 Mids & Highs Amp - Rockford Fosgate Power T400-4 Wiring - 1/0 AWG, 4 AWG, 8 AWG Alternator - Stock Batteries - non ext Box- Absolute PSEB12BK
95blazer Posted March 4, 2012 Author Report Posted March 4, 2012 im not to good at the hole design thing
Recommended Posts
Archived
This topic is now archived and is closed to further replies.