T/S for XL m2 12s, please anybody

[ChevyBoy95]

bottoming out on 32hz or 38hz in money man?

[ChevyBoy95]

SS?

WIth 2 m2 XLs running on 1 5k, with the system tuned properly there should be no need for a break in period. I would suggest investing in a DD1 and CC1 to properly set your amps.

I already have them. I just turned everything down for now so i dont break anything until a new box is done. Tuned with the -10 tone and 26hz SS they dont like it at all

problem, do it with the -5

[HazeGrey75]

SS?

WIth 2 m2 XLs running on 1 5k, with the system tuned properly there should be no need for a break in period. I would suggest investing in a DD1 and CC1 to properly set your amps.

I already have them. I just turned everything down for now so i dont break anything until a new box is done. Tuned with the -10 tone and 26hz SS they dont like it at all

problem, do it with the -5

I could set it at 0 and they still bottomed out. And output was not impressive for a 5000 watt system. It was supposed to be tuned to 32hz but I guess im a tard and did something wrong.

And the other question. I think its the 38hz note. The louder bass line

[HazeGrey75]

The first box I tried them in was my old level 4 box which was lacking a bit of port area. They where OK there until they started getting loose. It was only temporary.

[ChevyBoy95]

SS?

WIth 2 m2 XLs running on 1 5k, with the system tuned properly there should be no need for a break in period. I would suggest investing in a DD1 and CC1 to properly set your amps.

I already have them. I just turned everything down for now so i dont break anything until a new box is done. Tuned with the -10 tone and 26hz SS they dont like it at all

problem, do it with the -5

I could set it at 0 and they still bottomed out. And output was not impressive for a 5000 watt system. It was supposed to be tuned to 32hz but I guess im a tard and did something wrong.

And the other question. I think its the 38hz note. The louder bass line

dependent on your system, the higher or lower note?

[HazeGrey75]

SS?

WIth 2 m2 XLs running on 1 5k, with the system tuned properly there should be no need for a break in period. I would suggest investing in a DD1 and CC1 to properly set your amps.

I already have them. I just turned everything down for now so i dont break anything until a new box is done. Tuned with the -10 tone and 26hz SS they dont like it at all

problem, do it with the -5

I could set it at 0 and they still bottomed out. And output was not impressive for a 5000 watt system. It was supposed to be tuned to 32hz but I guess im a tard and did something wrong.

And the other question. I think its the 38hz note. The louder bass line

dependent on your system, the higher or lower note?

I want to say the higher note. Cause i can play "juice box" fine for the most part.

[HazeGrey75]

And thanks everybody for the replies. If I can get this straight Ill be sending in my team app. I dont want to be on a team with a sub par set up that dont represent. I know Ill be able to walk on everybody locally.

[ChevyBoy95]

well i know with my box, tuned at 32hz, i get about ~1-1.5in of excursion full tilt on the 32hz part, and about ~2.5in on the 38hz part.

Edited March 4, 2012 by ChevyBoy95

[HazeGrey75]

well i know with my box, tuned at 32hz, i get about ~1-1.5in of excursion full tilt on the 32hz part, and about ~2.5in on the 38hz part.

Im deff getting some excursion. Ive never seen a sub move like these are, minus the big excusion woofers like the new chinese junk XXX and W7. I think they are moving just a few mm to much though. I added .5 cubes to it last nigh to see if it would help. I dont think it made any difference at all.

[Soapbox]

1.5 per sub with 15sq of port works. I just raised my box tuning from 35; where it would play 25hz np, to 38hz to try and gain on the tl. Look for some new tl results in the next couple of days. Next move will be shrink the box down to 1.2.