reddraggons09 Posted March 22, 2012 Report Posted March 22, 2012 i have a 2010 dodge 2500 with a cummins diesel with 2 batts under hood what are direct repalcements for this... D6500?? also want to run additional battery in back can i mount this in the cab without any problems? and do i just run positive front to positive rear and ground rear to frame do i need fuses in positive run? Quote
SnowDrifter Posted March 22, 2012 Report Posted March 22, 2012 (edited) Pull out a tape measure, figure out the dimensions of your stock battery and if you have room to grow, then go pick a battery via your measurements. For fusing, you need a fuse next to (as close as possible to) each battery. And ground it to whatever you plan on using for the ground (geeze, did that make sense?) In other words, if you will be doing all of your grounds to the frame, ground it to that. If you will be doing them from the body, then ground to that. Edited March 22, 2012 by SnowDrifter Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
reddraggons09 Posted March 22, 2012 Author Report Posted March 22, 2012 What determines size of fuses needed Quote
01ExSport Posted March 22, 2012 Report Posted March 22, 2012 The size of wire used. Fuse rating for wires in the electrical section. Quote
ZombieFatMan Posted March 22, 2012 Report Posted March 22, 2012 i guess the next question is what are you running in this truck? that would determine what you will need as far a fueses ect. Quote "Walmart Where Car Audio Is Both Funny and Sad" "The weak are meat, and the strong do eat..."
reddraggons09 Posted March 22, 2012 Author Report Posted March 22, 2012 DC audio 5.0k and 175.4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.