Would this box be good for 2 SA 12'S?

[c.director]

thats the exact same amp i'm planning to run. how well do they do in your enclosure?

I can't say a lot, because I haven't heard them in a different box. I listen to rap/hip hop and they do well at anything ive tried to play, still get plenty low enough and the higher low notes are intense.

My rear view mirror won't stay set with the box in my avatar in a Dakota.

Edited April 4, 2012 by c.director

[bokeson]

do you have any videos of it playing in your truck?

[c.director]

do you have any videos of it playing in your truck?

No vids, no good camera.

Make sure your box is strong and efficient, and I think you will be pleased.

[bokeson]

hopefully. i had a sundown 12 in a t line and it wanged. Hopfully i get the results im looking for

[Joe X]

hopefully. i had a sundown 12 in a t line and it wanged. Hopfully i get the results im looking for

If you are aiming at output then yes make the port area per cube 14-15

[getlocivic]

yea id go with a little more port area i try to always have at least 14 per

[nascarguy301]

What do you have them tuned to?

[bokeson]

I tweaked it a little bit. so it is 14.06 per cube tuned at 34.37hz. would that work better?

[Joe X]

One way or the other It will work, I would set it at 14.5 and 35Hz. I would in any case worry about calculating right the port parts and even choosing the port location, frequently sub up/ port back is implemented with a 2 common wall shared port, like this:

Do some sketchup work on your design to make sure all the details are taken care of before cutting any wood.

Edited April 5, 2012 by Joe X

[bokeson]

One way or the other It will work, I would set it at 14.5 and 35Hz. I would in any case worry about calculating right the port parts and even choosing the port location, frequently sub up/ port back is implemented with a 2 common wall shared port, like this:

Do some sketchup work on your design to make sure all the details are taken care of before cutting any wood.

yeah, I'm not to skillful with google sketchup. but i want to add 45s and dont know how big they should be. or how to calculate them into bracing displacement. could you make me a design in sketchup if you had all the specs?