Guest Posted April 9, 2012 Report Posted April 9, 2012 That program is step 2 in the design process. Step 1 is using a WinISD, BassBox Pro, etc mocking up a decent response. winisd and bbp dont take into account vehicle response, so their graphs are completely irrelevant unless you put a mic in your car and measured sweeps. Ah dangit, thanks for catching that.. I had to modify some stuff.. I'm .5 from recommended.. over.. think it's going to be alright? looks good man. i dont know why everyone is telling you to put 100sqin of port per cube. its a 500 watt sub for god sakes. Quote
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 That program is step 2 in the design process. Step 1 is using a WinISD, BassBox Pro, etc mocking up a decent response. winisd and bbp dont take into account vehicle response, so their graphs are completely irrelevant unless you put a mic in your car and measured sweeps. Ah dangit, thanks for catching that.. I had to modify some stuff.. I'm .5 from recommended.. over.. think it's going to be alright? looks good man. i dont know why everyone is telling you to put 100sqin of port per cube. its a 500 watt sub for god sakes. Really? I had someone use BB6 for my box for my DC Lmao, but yeah it's only 500 watts.. it's nothing big not expecting much honestly. Just a tad big louder than the sealed.. thanks bro hopefully It'll turn out great. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 Thanks joe. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 That's alright, the port parts length would be: L Port Internal Assembly Parts: Front to Back = 9 x 12 1/2 Extension = 18 1/2 x 12 1/2 Thanks, so the cutout on Torres is right, right? Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
Joe X Posted April 9, 2012 Report Posted April 9, 2012 I have never checked that before but it's ok, that is if you don't mind cutting a 11+ in. sub cutout in a 12.5" tall panel.. to avoid issues when the box is not tall enough for an easy panel cut I go for all across baffles.. it's just a question of preference. Quote
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 I cut those peices out.. something is not right with the port peices, sure those are correct Joe? Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 I know it's late, but was curious if anyone would google sketchup the specs above? I can't seem to figure how to rotate and move Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
Joe X Posted April 9, 2012 Report Posted April 9, 2012 20 1/4 + 10 3/4 = 31 but need to be installed as intended. Quote
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 20 1/4 + 10 3/4 = 31 but need to be installed as intended. I had changed my width to 30.. forgot to post it that's my fault, but it's not the length that I'm worried about.. the port isn't the same height as the sides, and front and back.. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
TheNewbie Posted April 9, 2012 Author Report Posted April 9, 2012 20 1/4 + 10 3/4 = 31 but need to be installed as intended. I had changed my width to 30.. forgot to post it that's my fault, but it's not the length that I'm worried about.. the port isn't the same height as the sides, and front and back.. Quote Check out my build log: http://www.stevemead...60#entry1958353 Different folks have different strokes.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.