D-train-13k Posted April 9, 2012 Report Share Posted April 9, 2012 i have a wall with two 15's on 4k. right now its on a single 2k at 1 ohm. anyways. i have two mp8's and two dayton 6's and two crescendo super tweets. on a onx125.4 it kinda drowns them out because the port is right next to my head. so heres my question. i think it could be mostly pointed at the positioning of the mids as to why they arnt keepin up. i dont want to redo my doors so its either more power or do more drivers in a different location so what would yall do i know im going to need more power and more drivers in the end. but i need to start somewhere. The IrishmanCheck out my build hereXL 4th order wall build logIn Progress:alpine cda HU4th order Bandpass2xl 15's1- ab 400.1 (gonna be two hopefully)4- Crescendo 8's2- xts crecendo supertweeters 2 sq super tweetsMb quart 4.125Mechman 270a alt1- xs D27003- xs XP3000 4- odessey pc1700seller feed back threadhttp://www.stevemeadedesigns.com/board/topic/136418-d-train-13k/ Link to comment Share on other sites More sharing options...
Socky Posted April 9, 2012 Report Share Posted April 9, 2012 Might need some pillars, they help alot, which is what my bro did, and they keep up with his 4 15s on 2k, on the same mb quart. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
D-train-13k Posted April 9, 2012 Author Report Share Posted April 9, 2012 Might need some pillars, they help alot, which is what my bro did, and they keep up with his 4 15s on 2k, on the same mb quart. ehh im really hoping i dont have to glass some pillars lol i HATE fiberglassing The IrishmanCheck out my build hereXL 4th order wall build logIn Progress:alpine cda HU4th order Bandpass2xl 15's1- ab 400.1 (gonna be two hopefully)4- Crescendo 8's2- xts crecendo supertweeters 2 sq super tweetsMb quart 4.125Mechman 270a alt1- xs D27003- xs XP3000 4- odessey pc1700seller feed back threadhttp://www.stevemeadedesigns.com/board/topic/136418-d-train-13k/ Link to comment Share on other sites More sharing options...
Socky Posted April 9, 2012 Report Share Posted April 9, 2012 it might be the cheapest to keep up, but most time consuming lol. There are alot of helpful topics on hear make it easier. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
D-train-13k Posted April 9, 2012 Author Report Share Posted April 9, 2012 it might be the cheapest to keep up, but most time consuming lol. There are alot of helpful topics on hear make it easier. yeah i know how to do them. just hate it lol i have room on either side of my wall to put in a 8' mid and a super tweeter. so your thinking more drivers instead of power The IrishmanCheck out my build hereXL 4th order wall build logIn Progress:alpine cda HU4th order Bandpass2xl 15's1- ab 400.1 (gonna be two hopefully)4- Crescendo 8's2- xts crecendo supertweeters 2 sq super tweetsMb quart 4.125Mechman 270a alt1- xs D27003- xs XP3000 4- odessey pc1700seller feed back threadhttp://www.stevemeadedesigns.com/board/topic/136418-d-train-13k/ Link to comment Share on other sites More sharing options...
FroznBeavrBALLs Posted April 9, 2012 Report Share Posted April 9, 2012 Yeah we didnt think about pillars. lol I personally hate the way pillars look. unless they arent too big. 2 DC 12" lvl 4s 1 DC 1.2k XS Power S3400 big 3 Alll KNU wire Pioneer HU cheapo Legacy coaxes (just for now) http://www.stevemead...n-sentra-build/ Link to comment Share on other sites More sharing options...
Socky Posted April 9, 2012 Report Share Posted April 9, 2012 yea cause you got alot of power capable out of that amp, my bro has 2 8 mids, 4 cadence 6.5, 6 3" full ranges, and his are clear as fuck full tilt. With 4 15s on 2k. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz Link to comment Share on other sites More sharing options...
D-train-13k Posted April 9, 2012 Author Report Share Posted April 9, 2012 yea cause you got alot of power capable out of that amp, my bro has 2 8 mids, 4 cadence 6.5, 6 3" full ranges, and his are clear as fuck full tilt. With 4 15s on 2k. okay sounds good.. guess its time for two more 8's and super tweets The IrishmanCheck out my build hereXL 4th order wall build logIn Progress:alpine cda HU4th order Bandpass2xl 15's1- ab 400.1 (gonna be two hopefully)4- Crescendo 8's2- xts crecendo supertweeters 2 sq super tweetsMb quart 4.125Mechman 270a alt1- xs D27003- xs XP3000 4- odessey pc1700seller feed back threadhttp://www.stevemeadedesigns.com/board/topic/136418-d-train-13k/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.