Hugh G. Rection Posted April 12, 2012 Report Posted April 12, 2012 i decided to try one of these guys out in my gen3 g21. polished out the trigger bar and plunger, installed the connector, and also installed a glockworx competition spring kit. nice and easy job, ended up with about 2.5lb trigger, nice clean break. i highly recommend the setup. the parts only cost me $21 after shipping. Quote Owner of BigAss Ports
LT.Smoke Posted April 12, 2012 Report Posted April 12, 2012 I did my g23 with a Lonewolf 3.5lb connector and it is sweet too Quote Team MaxRetribution Si Vis Pacem Parabellum Id rather be judged by 12 than carried by 6 Bowhunting- Life Begins and Ends at Full Draw Bowhunting Team Fatal Trajectory Hunt Team http://www.stevemeadedesigns.com/board/topic/49335-sick96vtecaccords-t-line-build/?hl=sick96vtecaccord << Accord Build http://www.stevemeadedesigns.com/board/topic/68498-smokedout08impalas-tline-build/?hl=+sick96vtecaccord << Impala T-line build Rebassed.com for all your music needs 👌
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.