need box design for pioneer ts-w2000spl

[ham4864]

i want to build a box for my old pioneer ts-w2000spl

12" speaker

displacement is 0.083 cubic feet

these are the numbers i have to play with

tuned to 32-35Hz

pioneer says for ported enclosure 1.75cf

cut sheet and diagram would be nice.

amp is sax-1200d or saz-1000d

14"height

32"width

16"depth

thank you

[Joe X]

Ok this is done on Pioneer specs (checked the data you provided) , your amps can really cook that sub, set your subsonic filter to 30Hz to help protect it.

Enclosure Specifications:

Fb = 34 Hz

Vb = 1.741 ft^3

External Height = 14 in

External Width = 26.25 in

External Depth = 15 in

Port Width = 2 1/8 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

Front & Back = 26 1/4 x 14

Left & Right Sides = 13 1/2 x 12 1/2

Top & Bottom = 26 1/4 x 13 1/2

L Port Internal Assembly Parts:

Front to Back = 11 3/8 x 12 1/2

Extension = 15 x 12 1/2

Assembly guide:

If you want anything changed let me know.

[ham4864]

as long as i match the gain to the sub i should be good correct.

Edited April 13, 2012 by ham4864

[ham4864]

looks good but what about a design like this see how every think sits on the bottom and the front,back,port and sides are the same height.

i'm not that good with sketchup.

Edited April 13, 2012 by ham4864

[Joe X]

That's because the sub cutout on a 12.5" baffle would leave a clearance of 0.75 each side, can be done but an all across baffle is stronger and easier to cut but if you are not bothered by this here is the alternative assembly:

Enclosure Specifications:

Fb = 34 Hz

Vb = 1.741 ft^3

External Height = 14 in

External Width = 26.25 in

External Depth = 15 in

Port Width = 2 1/8 in

Cut Sheet List:

* All Dimensions in Inches.

* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

Front = 23 3/8 x 12 1/2

Back = 26 1/4 x 12 1/2

Left & Right Sides:

Side 1 = 13 1/2 x 12 1/2

Side 2 = 14 1/4 x 12 1/2

Top & Bottom = 26 1/4 x 15

L Port Internal Assembly Parts:

Front to Back = 11 3/8 x 12 1/2

Extension = 15 x 12 1/2

The figure matches the one you posted.