2 level 3 12s

[hertz2beloud]

Does this box look up to par for 2 level 3 12's on 2 t1000's? tuned to 35 hz port area is 14 in per cube or 43.5 total and it nets 3 cubes

Edited May 19, 2012 by hertz2beloud

[CJ18]

That will be just fine.

[Guest]

hard to tell if the port width after it bends goes to 1.5"

[hertz2beloud]

So after getting this box built and everything adjusted I have noticed one sub moving more then the other. I have checked the output voltage of each amp and it is within 1 volt. I checked polarity of the sub that seems not too move as much and its correctly wired. I even switched amps on the subs to make sure it was not an amp issue. After pulling my hair out I took it to a shop today and they seem to think since the port has no divider that is the problem. If anyone has any tips or experience with something like this I am all ears