aerickson Posted May 28, 2012 Report Posted May 28, 2012 I was going to buy a 50 ft roll of 0g for my amp/big 3. My question is can it also be used for ground wire or do I have to buy some ground wire seperate. Thanks for the help.
New2Dis Posted May 28, 2012 Report Posted May 28, 2012 same wire, copper is copper "Damned if i do, damned if i don't..."Sold to: RodeoSport, deeppinkdiver, kevosinn, CortezDTV Bought from: SlamminBeats, Carboardcat15
PyreX KinG Posted May 28, 2012 Report Posted May 28, 2012 u can use it for both, unless you prefeer things to be color coded. 97 Cadillac Eldorado ETC Current Setup: ~Kenwood DDX318 (HeadUnit) ~Kenwood eXcelon KFC-X133 (5-1/4" Doors) ~Kenwood eXcelon KFC-X693 (6"x9" Rear Deck) Coming Soon: Kenwood eXcelon KFC-X1730P (6.5" Doors w/ 1" Swivel Tweeter) Kenwood eXcelon XR-4S (400.4 Amp)
sprkn_ranger Posted May 28, 2012 Report Posted May 28, 2012 Wire is wire, weather it be ground or pos. the only diff is the color of the insulation. Just don't get them mixed up. Lol A trick you can do is put red and black heat shrink on the ends to know which one is pos/neg. Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/
sprkn_ranger Posted May 28, 2012 Report Posted May 28, 2012 K thanks. Sounded noobish I know. Hey we all start somewhere Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/
aerickson Posted May 28, 2012 Author Report Posted May 28, 2012 Would some knukonceptz kca be fine for big 3?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.